Redirigiendo al acceso original de articulo en 19 segundos...
Inicio  /  Applied Sciences  /  Vol: 9 Par: 7 (2019)  /  Artículo
ARTÍCULO
TITULO

Machinability of Stone?Plastic Materials During Diamond Planing

Zhaolong Zhu    
Dietrich Buck    
Xiaolei Guo    
Pingxiang Cao and Mats Ekevad    

Resumen

This paper investigated the machinability of a stone?plastic composite (SPC) via orthogonal cutting with diamond cutters. The objective was to determine the effect of cutting depth on its machinability, including cutting forces, heat, chip formation, and cutting quality. Increased cutting depth promoted an increase in both frictional and normal forces, and also had a strong influence on the change in normal force. The cutting temperatures of chips and tool edges showed an increasing trend as cutting depth increased. However, the cutting heat was primarily absorbed by chips, with the balance accumulating in the cutting edge. During chip formation, the highest von Mises strain was mainly found in SPC ahead of the cutting edge, and the SPC to be removed partially passed its elastic limit, eventually forming chips with different shapes. Furthermore, the average surface roughness and the mean peak-to-valley height of machined surfaces all positively correlated to an increase in cutting depth. Finally, with an increase in cutting depth, the chip shape changed from tubular, to ribbon, to arc, to segmental, and finally, to helical chips. This evolution in chip shape reduced the fluctuation in cutting force, improving cutting stability and cutting quality.

 Artículos similares

       
 
Sudjatmiko Sudjatmiko,Rudy Soenoko,Agus Suprapto,Moch Agus Choiron     Pág. 54 - 60
The research on the lathe process has described that the tool nose radius parameter is one of the factors that has an influence on surface roughness in the form of product quality. Chip slenderness ratio is an important parameter in the lathe process tha... ver más

 
Shih-Ming Wang, Chun-Yi Lee, Hariyanto Gunawan and Chin-Cheng Yeh    
This study proposes a hybrid optimization method which can help users to find optimal cutting parameters which will provide better efficiency and lower power consumption for a milling process. Empirical models including performance-power consumption char... ver más
Revista: Applied Sciences

 
Bruna Aparecida Rezende, Anderson Júnior dos Santos, Marcelo Araújo Câmara, Denilson José do Carmo, Manuel Houmard, Alessandro Roger Rodrigues and Juan Carlos Campos Rubio    
In order to obtain better cutting tool performance, the coatings appear as an alternative in the machining process. The goal of the coating is to improve tribological conditions in the chip-tool and tool-workpiece interfaces. On the other hand, the use o... ver más
Revista: Coatings

 
Victor Shapovalov, Alexandr Permyakov, Alexander Klochko     Pág. 118 - 126
The subject matter of the research in the article is the process of restoring the quality and accuracy of the working surface of the wheelsets of the main electric locomotives, electric sections. The purpose of the work is to develop a modeling method fo... ver más

 
Shao-Hsien Chen and Chi-Hsiang Pan    
During current high-speed cutting processing, the requirements on the CNC machine tool, controller, and cutting technique has become higher and higher. This research focuses on cutting tools, when the rake angles of different tools cause the shearing cut... ver más