|
|
|
|
|
Mudhar A. Al-Obaidi, Farhan Lafta Rashid, Arman Ameen, Mohammed Kadhom and Iqbal M. Mujtaba
Due to its high pollutant rejection and low energy usage, the spiral wound module of reverse osmosis (RO) process is the most commonly used technology utilised in wastewater treatment. For a spiral wound module, the presence of a feed spacer is important...
ver más
|
|
|
|
|
|
|
|
|
|
|
Zhengwei Wang, Haitao Gu, Jichao Lang and Lin Xing
This study verifies the effects of deployment parameters on the safe separation of Autonomous Underwater Vehicles (AUVs) and mission payloads. The initial separation phase is meticulously modeled based on computational fluid dynamics (CFD) simulations em...
ver más
|
|
|
|
|
|
|
|
|
|
|
Dongxu Zhang, Guoqiang Liu, Yongkang Lai, Xiaohui Lin and Weihuang Cai
This paper presents a channel radiator with ribbed ribs and primarily investigates the fluid flow and heat-transfer characteristics of the channel radiator. A three-dimensional numerical simulation of the radiator?s pressure-drop and heat-transfer proces...
ver más
|
|
|
|
|
|
|
|
|
|
|
Xiaoxia Zheng, Bohan He, Yu Zou, Qiao Yang, Yupeng Cao, Zhiqiang Li and Yaokun Han
It is well-established that the honeycomb sandwich composite structures are easily prone to damage under low-energy impact. Consequently, it would lead to a dramatic decrease in structural load-bearing capacity and a threat to overall safety. Both experi...
ver más
|
|
|
|
|
|
|
|
|
|
|
Wenbin Liu, Youshan Wang and Yuchen Ji
Landing impact load design is essential, but the process has rarely been fully described, and some designers have even neglected the differences between wheel-axle and ground-contact loads, as well as loads in the longitudinal direction, especially in ex...
ver más
|
|
|
|
|
|
|
|
|
|
|
Chao Zhang and Matthew Janeway
Optimization methods have been widely applied to the aerodynamic design of gas turbine blades. While applying optimization to high-fidelity computational fluid dynamics (CFD) simulations has proven capable of improving engineering design performance, a c...
ver más
|
|
|
|
|
|
|
|
|
|
|
Naef A. A. Qasem and Rached Ben-Mansour
Carbon capture is one of the recently raised technologies to mitigate greenhouse gas emissions. Adsorption was introduced as an energy-efficient carbon capture process, and the literature primarily shows the utilization of circular cross-sectional adsorp...
ver más
|
|
|
|
|
|
|
|
|
|
|
Hongcheng Li, Rong Zeng, Zhiyou Niu and Junqi Zhang
Clarifying the maize kernel movement during the crushing process is critical for improving the design and optimization of the impact mill. Rather than through experiments, maize kernel movement can be quantitatively analyzed through the discrete element ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Cheng-Yu Li, Fan Wang and Ai-Zhu Zhu
Based on the concept of structural damage control, a beam-through steel frame system with continuous columns was constructed. Replaceable connectors were set at both ends of an H-shaped steel column to connect the beam with high-strength bolts. In this s...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yaobin Li, Xin Xin, Tianfu Xu, Huixing Zhu, Haibin Wang, Qiang Chen and Bo Yang
Gas hydrates are likely to become an important strategic resource with commercial development prospects. It is therefore of great significance to realize the long-term and efficient production of methane hydrate reservoirs. Previous studies have shown th...
ver más
|
|
|
|
|
|