|
|
|
|
|
Weidong Cao, He Wang and Jian Tang
Guide vane submersible centrifugal pumps are a kind of submersible pump, and the fluid inside the pump is often mixed with gravel and other impurities during operation, affecting the pump?s operating efficiency and life expectancy. However, past studies ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Ezazul Haque Sabuz, Mohammed Noor-A-Alam, Waseem Haider and Ishraq Shabib
In this study, mechanical and electrochemical performance of borided additively manufactured (AM) and wrought 8620 low alloy steel were investigated and compared to their bare counterparts. The microstructure of borided 8620 exhibited the presence of FeB...
ver más
|
|
|
|
|
|
|
|
|
|
|
Junbo Liu, Xiaozhen Zhang, Zhixi Mai, Yongqing Wang, Shaohua Wang, Yebing Cai and Junli Feng
The rapid development of the traditional ceramic industry contributes considerably to economic advancements; however, the ecological hazards caused by the large amount of sintered ceramic wastes generated during ceramic production and discarded at landfi...
ver más
|
|
|
|
|
|
|
|
|
|
|
Chavarat Jarungvittayakon, Anak Khantachawana and Paphon Sa-ngasoongsong
Cobalt?chromium (CoCr) alloy is widely used for medical implants such as for dental or joint replacements because of its strength and high corrosion resistance. By throwing a spherical media against a material surface, fine-particle shot peening can modi...
ver más
|
|
|
|
|
|
|
|
|
|
|
Feng Li, Shisong Zheng and Fang Zhou
In this study, AlFeCrMoNi1.8Nb1.5 (at.%) eutectic high-entropy alloy (EHEA) coating was successfully prepared on the surface of M2 high-speed steel (HSS) by wide-laser cladding. The effects of laser defocusing amount, laser power, scanning speed, and pre...
ver más
|
|
|
|
|
|
|
|
|
|
|
Jordan Maximov and Galya Duncheva
This review paper analyses and summarises the results found while studying the slide burnishing (SB) of metal components refracted through a prism during the surface engineering (SE) process, over the period of January 2019 to January 2023. According to ...
ver más
|
|
|
|
|
|
|
|
|
|
|
M. S. M. Al-kahtani, Han Zhu, Yasser E. Ibrahim, S. I. Haruna and S. S. M. Al-qahtani
Polymer-modified cement mortar has been increasingly used as a runway/road pavement repair material due to its improved bending strength, bonding strength, and wear resistance. The flexural strength of polyurethane?cement mortar (PUCM) is critical in ach...
ver más
|
|
|
|
|
|
|
|
|
|
|
Hamidreza Ghandvar, Mostafa Abbas Jabbar, Michal Petru, Tuty Asma Abu Bakar, Lim Jia Ler and Seyed Saeid Rahimian Koloor
This study aims to investigate the microstructural alterations, mechanical properties, sliding wear behavior, and corrosion properties of Al-15%Mg2Si composites with different contents of yttria-stabilized zirconia (YSZ). Al-15%Mg2Si composites with the ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Haichao Huang, Yexiang Cui, Zhen Fu, Shuaipeng Wang, Yan Du, Fang Liu and Yanji Zhu
The design and preparation of hydrophobic, wear-resistant, and thermally conductive multifunctional composites is an important direction of scientific research and application. In this study, A-CF/EP/FEP composites were prepared by incorporating APDMS-mo...
ver más
|
|
|
|
|
|
|
|
|
|
|
Xiaolong Pan, Longshi Qiu, Xiaogang Hu and Haixia Jiang
In this study, duplex surface treatments were used to prepare a ZrO2/Cr bilayer coating on zirconium alloy cladding for enhancing the wear and corrosion behaviors. The surface and cross-section morphology of coated Zr-4 alloy was characterized; the resul...
ver más
|
|
|
|
|
|