|
|
|
|
|
Hanqiao Han, Yun Long and Jinqing Zhong
When we tested the water jet propulsion pump, we found that there were significant vibrations in the pump, especially at small flow points that deviated from the design conditions. The water jet propulsion pump is a mixed-flow pump with guide vane, which...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yingna Liang, Cunyuan Wang, Wei Wang, Hao Xing, Zhepeng Zhang and Dianrong Gao
The slipper pair is the crucial friction pair of the seawater axial piston pump. Taking seawater as the working medium will inevitably affect the bearing performance of the slipper pair. In this paper, a seawater axial piston pump slipper pair model with...
ver más
|
|
|
|
|
|
|
|
|
|
|
Haigang Wen, Luyao Li, Guangtai Shi, Haijun Ma and Xiaodong Peng
A spiral axial-flow blade pump (SABP), as the core piece of equipment in the oil and natural gas closed-gathering and transportation process, can not only transport gas?liquid mixtures with a high gas content, but can also transport gas?liquid?solid mixt...
ver más
|
|
|
|
|
|
|
|
|
|
|
Xiaowei Cai, Chun Zhang and Baoshou Wang
This paper focuses on the application of a cross-flow fan (CFF) to generate propulsion for a submersible aircraft with a flying wing configuration. A numerical method is established to simulate the CFF operating both in the air and underwater. This paper...
ver más
|
|
|
|
|
|
|
|
|
|
|
Tao He, Yingzhi Zhou, Yong Liu and Yang Xia
The cavitation phenomenon and shaft deformation have a significant impact on the tribological performance of the journal bearing. A mixed lubrication model is developed that takes into account surface roughness and asperity contact, as well as the effect...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yexiang Xiao, Zhonghua Gui, Xuesong Li, Sijia Tao, Guangtai Shi and Chunwei Gu
Due to the irregular change of gas void fraction (GVF) in multiphase pumps, the pressure distribution in the pump is often uneven, which leads to the formation of low-pressure area and thus the occurrence of cavitation. In order to study the gas phase an...
ver más
|
|
|
|
|
|
|
|
|
|
|
Haiyu Liu, Fangping Tang, Shikai Yan and Daliang Li
The S-shaped hydrofoil is often used in the design of reversible machinery due to its centrally symmetrical camber line. The objective of this paper is to study the influence of cloud cavitation on the flow structure and the unsteady characteristics of l...
ver más
|
|
|
|
|
|
|
|
|
|
|
Bu-Geun Paik, So-Won Jeong, Young-Ha Park, Jong-Woo Ahn, Ilryong Park and Jein Kim
One of the important things in a ship?s rudder design is the incidence angle of the rudder inflow to improve rudder cavitation performance. In the present study, the rudder inflow is measured by a 3-D LDV (laser Doppler velocimetry) system in a large cav...
ver más
|
|
|
|
|
|
|
|
|
|
|
Weidong Cao, Xinyu Yang and Zhixiang Jia
In order to study the influence of a balance hole?s diameter on the cavitation performance of low specific-speed centrifugal pumps, a centrifugal pump with a specific speed of 0.301 was selected as the research object. The pump?s cavitation performance, ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Jukka Tanttari and Antti Hynninen
Marine propulsors represent one of the most important contributors among anthropogenic sounds radiated into water. Blade based propulsors, e.g., propellers, generate tones at the blade passing frequency and its harmonics, especially in cavitating conditi...
ver más
|
|
|
|
|
|