|
|
|
|
|
Ayman El-Zohairy, Hani Salim, Hesham Shaaban and Mahmoud T. Nawar
Fatigue in steel?concrete composite beams can result from cyclic loading, causing stress fluctuations that may lead to cumulative damage and eventual failure over an extended period. In this paper, the experimental findings from fatigue loading tests on ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Huijuan Wang, Changyong Li, Sihao Song, Yao Wang, Qingxin Meng and Fenglan Li
Because researchers are aiming to restore the deformation and minimize the crack width of existing concrete structures, the strengthening technology of prestressed carbon-fiber-reinforced plastic (CFRP) is currently the focus of many studies and applicat...
ver más
|
|
|
|
|
|
|
|
|
|
|
Thi Tuyet Trinh Nguyen, Van Bac Nguyen and Minh Quan Thai
In this paper, the flexural strength and buckling of the partially concrete-filled steel tubes (PCFST) under laterally repeated loads was investigated through three-point bending test configuration. Three-dimensional Finite Element (FE) models of the ben...
ver más
|
|
|
|
|
|
|
|
|
|
|
Narjes J. Alamer, Munirah F. Aldayel and Ashraf Khalifa
Plastic pollution is one of the most serious environmental issues, causing severe environmental damage. It is of vital importance to find an efficient and eco-friendly approach to biodegrading plastics. The aim of this study was to isolate and characteri...
ver más
|
|
|
|
|
|
|
|
|
|
|
Eugen Stockburger, Hendrik Wester and Bernd-Arno Behrens
Advanced high-strength steels (AHHS) are widely used in many production lines of car components. For efficient design of the forming processes, numerical methods are frequently applied in the automotive industry. To model the forming processes realistica...
ver más
|
|
|
|
|
|
|
|
|
|
|
Stefan Ritter and Hans-Peter Seifert
Low-alloy reactor pressure vessel steels have a rather low susceptibility to stress corrosion cracking (SCC) in a boiling water reactor (BWR) environment if the high-temperature water contains no anionic impurities. Recent investigations revealed that un...
ver más
|
|
|
|
|
|
|
|
|
|
|
Mingtao Gao, Hongyu Yan, Huiqiang Duan and Si Xiong
The paper represents a test investigation of the mechanical properties and acoustic emission (AE) characteristics of low-strength coal specimens subjected to cyclic loading and unloading. From the lab tests, the following conclusions can be obtained: (1)...
ver más
|
|
|
|
|
|
|
|
|
|
|
Idra Herlina, Yulistia Anggraini, Edwin Rizki Safitra
Pág. 16 - 21
Polypropylene/sugarcane bagasse silica (PP/SiO2) composites have been synthesized. The sol gel method with 1 M NaOH was used to synthesize silica from bagasse ash. The results showed that the silica yield was 52.8%. The resulting silica was blended with ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Jaemin Lee, Diego Perrera and Hyun Chung
In this article, a layered shell element-based, elastic finite element method for predicting welding distortion in multi-pass welding is developed. The welding distortion generated in each pass can be predicted by employing layer-by-layer equivalent plas...
ver más
|
|
|
|
|
|
|
|
|
|
|
Guoqian Wei, Shanshan Li, Yongxing Guo and Zhang Dang
The real weld toe geometry is generally not mathematically perfect, resulting in obvious stress concentration effects, both on the weld section and along the longitudinal direction of the weld toe. The true stress-strain state at the local weld toe direc...
ver más
|
|
|
|
|
|