|
|
|
Guangya Zhu, Chongyu Wang, Wei Zhao, Yonghui Xie, Ding Guo and Di Zhang
The diagnosis of blade crack faults is critical to ensuring the safety of turbomachinery. Blade tip timing (BTT) is a non-contact vibration displacement measurement technique, which has been extensively studied for blade vibration condition monitoring re...
ver más
|
|
|
|
|
|
|
Katharina Brinkmann, Thomas Hoffmann, Lars Panning-von Scheidt and Heinrich Stüer
In this work, the vibration response of an academic free-standing turbine blisk is analyzed in regard to transient resonance passages. Measurement data are recorded using strain gauges and tip timing to evaluate the blades first bending mode both linearl...
ver más
|
|
|
|
|
|
|
Huang Huang, Mingming Yang and Dingxi Wang
Flutter was encountered at part speeds in a scaled wide chord fan blisk designed for a civil aeroengine during a rig test when the fan bypass flow was throttled toward its stall boundary. Analysis of the blade tip timing measurement data revealed that th...
ver más
|
|
|
|
|
|
|
Edward Rokicki, Radoslaw Przysowa, Jerzy Kotkowski and Pawel Majewski
Magnetic sensors are widely used in aeroengines and their health management systems, but they are rarely installed in the engine hot section due to the loss of magnetic properties by permanent magnets with increasing temperature. The paper presents and v...
ver más
|
|
|
|
|
|
|
Takashi Ando
Mechanically robust turbine design with respect to blade vibration is challenging when dealing with nozzle-ring fouling and wear. Especially for engines operating with heavy fuel oil (HFO), the nozzle rings of the turbocharger turbines are prone to sever...
ver más
|
|
|
|
|
|
|
Minh N. Doan, Yuriko Kai and Shinnosuke Obi
This article proposes an experimental apparatus design to measure the power of a cross-flow marine hydrokinetic turbine system operating in a laboratory water tunnel. Data, from one Hall sensor output signal, was processed to capture the three types of t...
ver más
|
|
|
|