|
|
|
|
|
Ishanka Prabhath Wimalaweera, Yuansong Wei, Tharindu Ritigala, Yawei Wang, Hui Zhong, Rohan Weerasooriya, Shameen Jinadasa and Sujithra Weragoda
The efficiency of magnetic seed coagulation (MSC) with pH adjustment by NaOH and Ca(OH)2 as a pretreatment for high-strength natural rubber industrial wastewater (NRIWW) was compared in this study. The high content of suspended solids (SSs) and other inh...
ver más
|
|
|
|
|
|
|
|
|
|
|
Prem Kumar George, Thirumurugan Varatharajan, Satyanarayanan Kachabeswara Srinivasan, Ibrahim Y. Hakeem and Yasin Onuralp Özkiliç
Reinforced concrete infilled frames have been studied over the years along with the infilled openings. To resist the lateral loads that are applied on the frames, stress is transferred from the reinforced concrete (RC) to infill, which leads to brittle c...
ver más
|
|
|
|
|
|
|
|
|
|
|
Firas Daghistani, Abolfazl Baghbani, Hossam Abuel Naga and Roohollah Shirani Faradonbeh
This study aimed to examine the shear strength characteristics of sand?granular rubber mixtures in direct shear tests. Two different sizes of rubber and one of sand were used in the experiment, with the sand being mixed with various percentages of rubber...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yizheng Yu, Pengxiang Lv, Xiao Liu and Xiang Liu
The flow-induced vibration characteristic of the U-section rubber outer windshield structure of high-speed train is the key factor to limit its high-speed movement. Accurate and effective flow-induced vibration analysis of windshield structures is an imp...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yang Li, Jiaqi Chai, Ruijun Wang, Yu Zhou and Xiaogen Tong
As the number of discarded tyres continues to increase, causing serious environmental problems, the need of recycling the waste tyre rubber become extremely urgent in worldwide. Today, there is an increasing focus on recyclable materials. The reuse of wa...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yujie Zheng, Xiutao Yang, Qianyan Zhao, Yaning Hao, Yucheng Yang, Juehan Sun, Junqiang Tang, Hongguo Zhang and Guanggen Zeng
Carbon-based composite conductive ink (3CI) has some challenges to its properties. Here, combined with the application of 3CI on silicon keypads, a series of studies on the electrical, mechanical and thermal performance of 3CI has been conducted by addin...
ver más
|
|
|
|
|
|
|
|
|
|
|
Wachara Kalasee and Panya Dangwilailux
The size distribution and total particle mass concentration (TPMC) of smoke particles from para rubber wood (Hevea brasiliensis) combustion in the ribbed smoked sheet (RSS) process were studied. In this experiment, temperature data values of para rubber ...
ver más
|
|
|
|
|
|
|
|
|
|
|
B. E. UDOM, B. O. NUGA, O. J. KAMALU
Pág. Page:32 - 42Abstract
The study was undertaken in two forest ecosystems in southern Nigeria to evaluate variability in soil sealing, water retention and structural properties of soils derived from Shale and Coastal plain sand (CPS) under Gmelina and rubber land use. Soil samp...
ver más
|
|
|
|
|
|
|
|
|
|
|
Md Zahid Hossain Khan, Suhana Koting, Herda Yati Binti Katman, Mohd Rasdan Ibrahim, Ali Mohammed Babalghaith and Obada Asqool
The utilisation of reclaimed asphalt pavement (RAP) as a suitable substitute for natural aggregate and binder offers an energy-saving and cost-effective approach to enhance the performance of asphalt mix. Realising the potential use of RAP as a promising...
ver más
|
|
|
|
|
|
|
|
|
|
|
Xin Liu, Chaoyang Tian and Hengxing Lan
This paper introduces a rubber?calcareous sand mixture as a lightweight building material in offshore engineering. The mechanical properties of mixtures of varying rubber contents were investigated by performing a one-dimensional (1-D) compression test i...
ver más
|
|
|
|
|
|