|
|
|
Iurii Vakaliuk, Silke Scheerer and Manfred Curbach
In the case of solid slabs made from reinforced concrete that are usually subjected to bending, large areas of the structure are stressed well below their load-bearing capacity or remain stress-free. Contrary to this are shell structures, which can bridg...
ver más
|
|
|
|
|
|
|
Carmen Zaharia, Corina-Petronela Musteret and Marius-Alexandru Afrasinei
Application of some hybrid materials as coagulation?flocculation agents in single or combined treatment steps for colored wastewater (industrial dye-containing effluents).
|
|
|
|
|
|
|
Lixin Wang, Wenlei Sun, Jintao Zhao, Xuedong Zhang, Cheng Lu and Hao Luo
As a critical raw material for the textile industry, cotton lint provides various types of cotton yarns, fabrics and finished products. However, due to the complexity of the supply chain and its many links, information records are often missing, inaccura...
ver más
|
|
|
|
|
|
|
Fadwa Maanane, Adil El Yadini, Marouane El Alouani, Jamal Mabrouki, Hamid Saufi and Mohamed Tabyaoui
Wastewater discharge from the textile industry poses significant health problems for humans. As a result, the effluent waters are often rich in dyes, whose low natural decomposition capacity makes their treatment complex, thus contributing to environment...
ver más
|
|
|
|
|
|
|
Iurii Vakaliuk, Silke Scheerer and Manfred Curbach
Concrete is the most widely used building material today. The enormous amount used goes hand in hand with high material consumption and CO2 emissions. Thus, building with concrete must be improved, becoming part of the solution on the way to climate-frie...
ver más
|
|
|
|
|
|
|
Morgan Renard, Waldemar Machnowski and Adam K. Puszkarz
The research presented in this article concerns the thermal properties of multilayer protective clothing, specifically, the impact of phase-change material (PCM) incorporation on the occurring heat transfer. Multilayer textile assemblies with PCM inserts...
ver más
|
|
|
|
|
|
|
Rabeb Ayed, Salwa Bouadila, Safa Skouri, Laura Boquera, Luisa F. Cabeza and Mariem Lazaar
By enhancing the thermal properties of cement-based building materials, energy consumption and carbon dioxide (CO2) emissions related to space conditioning in buildings can be alleviated. This study aims to present cement-based composites reinforced by t...
ver más
|
|
|
|
|
|
|
Sanjay Gokul Venigalla, Abu Bakar Nabilah, Noor Azline Mohd Nasir, Nor Azizi Safiee and Farah Nora Aznieta Abd Aziz
Textile-reinforced concrete (TRC) is a form of reinforced concrete, where conventional reinforcement is replaced with textiles or fibers. The high tenacity of the textile fibers results in flexible and durable concrete structures. The literature has been...
ver más
|
|
|
|
|
|
|
Philip Skov Halding
To reduce the global emission of CO2 from the building industry, researchers, architects and manufacturers must consider new ways of constructing precast concrete buildings. Modern concrete columns and walls are not optimized to the applied load, and the...
ver más
|
|
|
|
|
|
|
Kyung-Min Kim and Ju-Hyun Cheon
Textile-reinforced concrete (TRC) has many advantages, including corrosion resistance, but TRC is a novel composite material and there is limited experimental research on the flexural behavior of TRC members. This paper aims to experimentally evaluate th...
ver más
|
|
|
|