|
|
|
|
|
Shilong Peng, Yuhao Xu, Guangyong Cao and Lei Pei
The study of the changes in stress and deformation of frozen walls during excavation has always been a hot topic in underground freezing engineering, and the size of the plastic zone is an important basis for evaluating the stability of frozen walls. In ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Fernando Gómez-Martínez and Agustín Pérez-García
Current formulations proposed by Eurocode 8 part 3 for the inelastic deformations of existing reinforced concrete members are assessed separately for wide beams (WB) and conventional deep beams (DB). The current approach, based on a large experimental da...
ver más
|
|
|
|
|
|
|
|
|
|
|
Mohammad Sadik Khan, Masoud Nobahar and John Ivoke
Geographically, at the center of Mississippi is a concentration of High Plastic Yazoo Clay Soil (HPYCS). Shallow landslides frequently occur in embankments constructed with HPYCS caused by rainfall-induced saturation of the embankment slope. The traditio...
ver más
|
|
|
|
|
|
|
|
|
|
|
Andrei Nazarov, Flavien Vucko and Dominique Thierry
Hydrogen in combination with mechanical stress can lead to rapid degradation of high-strength steels through environmentally assisted cracking mechanisms. The scanning Kelvin probe (SKP) was applied to automotive martensitic steel grade MS1500 in order t...
ver más
|
|
|
|
|
|
|
|
|
|
|
Seong-Wook Han, Yeun Chul Park, Ho-Kyung Kim and Soo-Chang Kang
Plastic deformation during the manufacture process of electric resistance welded (ERW) pipe determines the stress?strain relationship of the steel pipe, which affects the collapse pressure of offshore pipelines. To track the deformation history of the pi...
ver más
|
|
|
|
|
|
|
|
|
|
|
Oleksandr Paliukh,Petro Kyrychok,Ruslan Trishchuk,Maxym Korobka,Yevhenii Dziadyk
Pág. 80 - 90
An experimentally determined list of the required and sufficient technological operations to produce semi-hard book covers has been proposed, with the calculated contour and structural design, which implies strict tolerances in the deviations from a rect...
ver más
|
|
|
|
|
|
|
|
|
|
|
Larysa Yuzevych,Larysa Yankovska,Lyubomyr Sopilnyk,Volodymyr Yuzevych,Ruslan Skrynkovskyy,Bohdan Koman,Lyudmila Yasinska-Damri,Nell? Heorhiadi,Roman Dzhala,Mykhailo Yasinskyi
Pág. 23 - 29
A new criterion of strength and a set of informative parameters have been devised for modelling the stressed-strained state (SSS) of the underground metal pipeline (UMP) taking into consideration the system of defects of the cavity type, atop of which th...
ver más
|
|
|
|
|
|
|
|
|
|
|
Guodong Yi, Ye Liang, Chao Wang and Jinghua Xu
Residual stress is the main cause of flatness defects in sheet metal and the basic method to improve the shape quality of the sheet is to reduce and eliminate the residual stress by multi-roll levelling. The curvature coupling between repeated sheet bend...
ver más
|
|
|
|
|
|
|
|
|
|
|
Zhanzhong Yin, Dazhe Feng and Wenwei Yang
In the current design of steel eccentrically braced frames (EBFs), the yielding link is coupled with the floor beam. This causes the design of cross-sectional dimensions of links to be enlarged, resulting in over-designed structures and foundations, and ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Svetlana Zyhulia,Oksana Barauskiene
Pág. 22 - 28
We have developed a comprehensive technology to strengthen printing cylinders by forming a regular microrelief at the surface followed by chromium-plating.Our research into the influence of comprehensive machining of a printing cylinder on the quality of...
ver más
|
|
|
|
|
|