205   Artículos

 
en línea
George Tzoumakis, Konstantinos Fotopoulos and George Lampeas    
Future liquid hydrogen-powered aircraft requires the design and optimization of a large number of systems and subsystems, with cryogenic tanks being one of the largest and most critical. Considering previous space applications, these tanks are usually st... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Munsu Kim, Lorena Perez-Andrade, Luke N. Brewer and Gregory W. Kubacki    
This paper investigates the effect of the microstructure on the corrosion behavior of cold sprayed (CS) AA5083 compared to its wrought counterpart. It has been shown that the microstructure of CS aluminum alloys, such as AA2024, AA6061, and AA7075, affec... ver más
Revista: Corrosion and Materials Degradation    Formato: Electrónico

 
en línea
Jun Wu, Wen Wang, Minghui Lu and Yu Hu    
A metal fatigue damage model is established in this study by employing real-time strain monitoring to evaluate the damage state of metal materials. The fatigue life simulation, based on crystal plasticity finite element analysis, establishes the constitu... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Haozheng Qu, Liang Yin, Michael Larsen and Raul B. Rebak    
The corrosion-resistant properties of IronChromium?Aluminum (FeCrAl) alloys have been known for nearly a century. Since the 1950s, they have been explored for application in the generation of nuclear power. In the last decade, the focus has been on the u... ver más
Revista: Corrosion and Materials Degradation    Formato: Electrónico

 
en línea
L. P. Cahalan, M. B. Williams, L. N. Brewer, M. M. McDonnell, M. R. Kelly, A. D. Lalonde, P. G. Allison and J. B. Jordon    
Large-scale metal additive manufacturing (AM) provides a unique solution to rapidly develop prototype components with net-shape or near-net shape geometries. Specifically, additive friction stir deposition (AFSD) is a solid-state method for large-scale m... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Ruilin Liu, Yunqi Liu, Hongming Liu, Yuanxing Li, Hui Chen and Zongtao Zhu    
Laser?MIG hybrid welding?brazing was used to weld 304 stainless steel and 6061-T6 aluminum alloy with a thickness of 2 mm. The microstructure, morphology, chemical composition and corrosion behavior of the samples after high-temperature oxidation were in... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Shuai Zhang, Mengcheng Gong, Ling Cen, Yang Lu and Ming Gao    
Hybrid wire arc additive-milling subtractive manufacturing (HWMM) is an effective way to improve the quality of complex metal components, but the difference in the properties of the aluminum alloy and magnesium alloy fabricated by HWMM has been not addre... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Qi Wang, Rao Fu, Fuji Wang, Chaoyang Luo, Jiankang Li and Zhenyuan Jia    
Laser direct joining enables non-destructive and lightweight joining of carbon fiber reinforced thermoplastic (CFRTP) composites and aluminum alloys. The interfacial bonding process determines the joint performance and is influenced by the time-varying t... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Juraj Ru?barský    
In the experiment, the roughness was measured on a machined surface with high gloss, which was also the main requirement for the test samples. For this reason, the samples made of stainless steel A304 and aluminum alloy AW 2017 were created by a progress... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Zhengyu Zhang, Raja Shekar Bhupal Dandu, Edwin Eyram Klu and Wenjun Cai    
Tribocorrosion, a research field that has been evolving for decades, has gained renewed attention in recent years, driven by increased demand for wear- and corrosion-resistant materials from biomedical implants, nuclear power generation, advanced manufac... ver más
Revista: Corrosion and Materials Degradation    Formato: Electrónico

« Anterior     Página: 1 de 15     Siguiente »