|
|
|
|
|
George Xiroudakis, George Saratsis and Ilias Lazos
This paper uses the displacement discontinuity method, one of the boundary element methods, to solve two major engineering problems. The first one addresses the safe design of underground excavations in fractured rock masses. The implemented method was u...
ver más
|
|
|
|
|
|
|
|
|
|
|
Xiaoqing Lu and Guanxi Yan
Most semi-circular bend (SCB) tests on concrete have been conducted with a pre-crack with a straight-through tip, thereby undermining the determination of the tensile fracture toughness (KIc). Therefore, the present study involved mixed-mode (tensile?she...
ver más
|
|
|
|
|
|
|
|
|
|
|
Ingyu Noh, Sangyeop Hong and Jaehoon Kim
Among the various components of a tire, this study explores the tread portion, which has the longest contact with the ground during the summer, all-weather, and in the winter. The mechanical properties of three types of tread crack specimens were measure...
ver más
|
|
|
|
|
|
|
|
|
|
|
Jihoon Kim, Jeongyeol Park and Myunghyun Kim
Welding is used as the main joining method in various industries, including the shipbuilding industry. In the case of welded structures, structural integrity assessment is essential to ensure the safety of the structure because many defects inevitably ex...
ver más
|
|
|
|
|
|
|
|
|
|
|
Behdad Garmeh, Masoud Kasiri-Asgarani, Kamran Amini, Hamid Ghayour, Hamid Reza Bakhsheshi-Rad and Filippo Berto
Carbide-free bainitic (CFB) steels with a matrix of bainitic ferrite and thin layers of retained austenite, to reduce the manufacturing costs, usually do not contain alloying elements. However, a few reports were presented regarding the effect of alloyin...
ver más
|
|
|
|
|
|
|
|
|
|
|
Qin Dong, Mengyuan Rong and Geng Xu
The crack closure phenomenon significantly influences low cycle fatigue (LCF) crack growth. The crack closure theory deems that a crack can grow only when the applied load is greater than the fatigue crack opening and closing loads. The revised crack clo...
ver más
|
|
|
|
|
|
|
|
|
|
|
Jingxia Yue, Jiankang Lei, Yordan Garbatov and Ke Yang
Many studies have shown that the linear elastic fracture mechanics (LEFM) method based on the stress intensity factor range (?K) has limitations that cannot be ignored. Due to neglecting the influence of plastic deformation near the crack tip, LEFM shows...
ver más
|
|
|
|
|
|
|
|
|
|
|
Myung Soo Kang and Yun-Kyu An
This paper proposes a fatigue crack evaluation technique based on digital image correlation (DIC) with statistically optimized adaptive subsets. In conventional DIC analysis, a uniform subset size is typically utilized throughout the entire region of int...
ver más
|
|
|
|
|
|
|
|
|
|
|
Fernando Antunes, Luís Santos, Carlos Capela, José Ferreira, José Costa, Joel Jesus and Pedro Prates
Selective Laser Melting (SLM) is an additive manufacturing technology, ideal for the production of complex-shaped components. Design against fatigue is fundamental in the presence of cyclic loads, particularly for these materials which typically have sig...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yuta Honma, Gen Sasaki and Kunihiko Hashi
In our previous study, intercritical quenching from the dual-phase region of ferrite and austenite regions, which is called lamellarizing (L) treatment, brought a clear improvement of balance between the strength and toughness of Cu-containing low alloy ...
ver más
|
|
|
|
|
|