|
|
|
Ayman El-Zohairy, Hani Salim, Hesham Shaaban and Mahmoud T. Nawar
Fatigue in steel?concrete composite beams can result from cyclic loading, causing stress fluctuations that may lead to cumulative damage and eventual failure over an extended period. In this paper, the experimental findings from fatigue loading tests on ...
ver más
|
|
|
|
|
|
|
Zhuang Wang, Bing Wang, Haozhe Jiang and Ping Zhuge
To investigate the influence of external prestressing with carbon fiber-reinforced polymer (CFRP) tendons on the flexural and shear performance of reinforced concrete beams, a total of six simply supported beams with a length of 3.5 m and two two-span co...
ver más
|
|
|
|
|
|
|
Massimo Chiari
Ion beam analysis (IBA) methods refer to a set of analytical techniques based on the interactions of energetic ions, produced by a particle accelerator, with matter. The result of such interactions is the emission of characteristic radiation, X and gamma...
ver más
|
|
|
|
|
|
|
Stepan Yaramyshev, Winfried Barth, Simon Lauber, Maksym Miski-Oglu, Anna Rubin, Uwe Scheeler, Hartmut Vormann and Markus Vossberg
Numerous ambitious particle accelerator facilities, based on proton and ion linear accelerators, have recently been in development for fundamental research, as well as for industrial applications. The advanced design of such new machines, as well as the ...
ver más
|
|
|
|
|
|
|
Xiu Xiao, Qunyi Wang, Bohan Yao, Linan Guo, Chuanqing Zhu, Cong Zhao, Ling Liu and Minyi Xu
Vibration sensing is of great significance in offshore engineering monitoring and safety detection. This paper presented a low-frequency vibration sensor (LV-TENG) based on a cantilever-beam-structured triboelectric nanogenerator, which can perform high-...
ver más
|
|
|
|
|
|
|
Weiheng Liu, Jianwei Zhang, Hang Liu, Fei Wang, Juan Liu and Mingjie Han
Based on a practical engineering case of seismic strengthening, this paper used the enlarging cross-section method and an external self-centering substructure to improve the seismic performance and seismic resilience of existing frame structures. Among t...
ver más
|
|
|
|
|
|
|
Khalid Alkhuzai, Luigi Di Sarno, Abdullah Haredy, Raed Alahmadi and Danah Albuhairi
The formation of cracks in concrete structures occurs due to a multitude of causes ranging from shrinkage to external loading and environmental exposure. This phenomenon can significantly affect the lifecycle of concrete structures. Self-healing concrete...
ver más
|
|
|
|
|
|
|
Yanwu Tao, Renqing Zhu, Jiayang Gu, Qi Wei, Fangxin Hu, Xiaosen Xu, Zhongyu Zhang and Zhiyu Li
The sloshing response is crucial to the design and operation of aquaculture vessels and affects the safety of the culture equipment and the efficiency of the culture operation. A 1/50 scaled model was utilized to investigate the coupled sloshing response...
ver más
|
|
|
|
|
|
|
Jiachen Wang and Zhou Zhou
This paper introduces the novel application of the mass and force lumping technique to enhance the finite element discretization of the fully intrinsic beam formulation. In our aeroelastic system model, 2-D unsteady aerodynamics were incorporated alongsi...
ver más
|
|
|
|
|
|
|
Wutong Yan, Liangjiang Chen, Bing Han, Huibing Xie and Yue Sun
Interfacial slip effects and the unbonded phenomenon of external tendons are the key mechanical features of the externally prestressed steel-concrete composite beams (EPCBs). In this paper, an 8-node fiber beam element is built for the nonlinear analysis...
ver más
|
|
|
|