ARTÍCULO
TITULO

Compressive Strength of Volcanic Ash/Ordinary Portland Cement Laterized Concrete

Olawuyi B.J.    
Olusola K. O.    

Resumen

This study investigates the effect of partial replacement of cement with volcanic ash (VA) on the compressive strength of laterized concrete. A total of 192 cubes of 150mm dimensions were cast and cured in water for 7, 14, 21, and 28 days of hydration with cement replacement by VA and sand replacement by laterite both ranging from 0 to 30% respectively, while a control mix of 28-day target strength of 25 N/mm2 was adopted. The results show that the density and compressive strength of concrete decreased with increase in volcanic ash content. The 28-day, density dropped from 2390 kg/m3 to 2285 kg/m3 (i.e. 4.4% loss) and the compressive strength from 25.08 N/mm2 to 17.98 N/mm2 (i.e. 28% loss) for 0-30% variation of VA content with no laterite introduced. The compressive strength also decreased with increase in laterite content; the strength of the laterized concrete however increases as the curing age progresses.

 Artículos similares

       
 
Anna Chomicz-Kowalska and Krzysztof Maciejewski    
This paper investigates the effects of incorporating dispersed fibrous reinforcement in hydraulically bound granular 0/16-mm mixtures. The evaluated fibrous reinforcement comprised a mixture of polypropylene and alkali-resistant glass fibers in a 1:2 wei... ver más
Revista: Applied Sciences

 
Yadong Zheng, Lianying Zhang, Peng Wu, Xiaoqian Guo, Ming Li and Fuqiang Zhu    
The physical and mechanical properties of rocks change significantly after being subjected to high temperatures, which poses safety hazards to underground projects such as coal underground gasification. In order to investigate the effect of temperature o... ver más
Revista: Applied Sciences

 
Matija Zvonaric, Mirta Ben?ic, Ivana Bari?ic and Tihomir Dok?anovic    
The high stiffness of cement-bound aggregate (CBA) is recognized as its main drawback. The stiffness is described by the modulus of elasticity, which is difficult to determine precisely in CBA. Incorporating rubber in these mixtures reduces their stiffne... ver más
Revista: Applied Sciences

 
Kre?imir Nincevic, Thierry Guillet, Omar Al Mansouri and Roman Wan-Wendner    
This contribution summarizes the largest available literature data collection on tensile and shear loaded anchor tests, obtained in two independent studies and performed by two different research groups. It was the objective of the two studies to investi... ver más
Revista: Applied Sciences

 
?iga Unuk and Milan Kuhta    
A nonlinear semi-numeric and finite element analysis of three-point bending tests of notched polymer fiber-reinforced concrete prisms was performed. The computational and experimental results were compared in terms of the load-displacement behavior. The ... ver más
Revista: Applied Sciences