ARTÍCULO
TITULO

Granulated blast furnace slag to reduce grounding resistance

Chen    
S.-D.    

Resumen

No disponible

 Artículos similares

       
 
Khaled Ibrahim Azarroug Ehwailat, Mohd Ashraf Mohamad Ismail and Ali Muftah Abdussalam Ezreig    
The treatment of sulfate-bearing soil with calcium-based stabilizers such as cement or lime often results in ettringite formation, consequently leading to swelling and strength deterioration. Ettringite formation has negative environmental and economic e... ver más
Revista: Applied Sciences

 
Min-Jae Kim, Booki Chun, Hong-Joon Choi, Wonsik Shin and Doo-Yeol Yoo    
This study investigated the influence of ordinary Portland cement (OPC) and reactive and non-reactive mineral additives on the characteristic microstructure and mechanical performance of ultra-high-performance, strain-hardening cementitious composites (U... ver más
Revista: Applied Sciences

 
Ahmed Abdelmonim and Dan V. Bompa    
This paper examines the performance of multi-binder conventional geopolymer mixes (GCMs) with relatively high early strength, achieved through curing at ambient temperature. Mixes incorporating ground granulated blast-furnace slag (GGBS), fly ash (FA) an... ver más
Revista: Infrastructures

 
Bernard A. Zulu, Shingo Miyazawa and Nobukazu Nito    
Thermal stresses are generated in concrete during the accelerated curing process in precast concrete. These stresses may cause concrete to crack, which would have a negative effect on the general concrete performance. This paper provides the results of t... ver más
Revista: Infrastructures

 
Taegyu Lee and Jaehyun Lee    
The mixing proportions of concrete were examined with regard to the durability performance and early strength in coastal areas. Research was conducted to improve the C24 mix (characteristic strength of 24 MPa). C35 concrete (characteristic strength of 35... ver más
Revista: Applied Sciences