Inicio  /  POWDER TECHNOLOGY  /  Vol: 149 Núm: 2-3 Par: 0 (2005)  /  Artículo
ARTÍCULO
TITULO

Effect of coarse particles on the strength of alumina made by slip casting

Tadashi Hotta    
Hiroya Abe    
Makio Naito    
Minoru Takahashi    
Keizo Uematsu and Zenji Kato    

Resumen

No disponible

 Artículos similares

       
 
Di Sun, Yongzhou Li, Peijin Liu, Bofeng Chen and Wei Fan    
A gas?solid-coupled sandwich combustion model was established for ammonium perchlorate (AP)/hydroxyl-terminated polybutadiene (HTPB) composite propellant. Numerical simulations were conducted to investigate the influence of the content of AP and the rela... ver más
Revista: Aerospace

 
Zhi Li, Weiyong Chen, Yinghui Li and Wenliang Wu    
This study considered the effect of pavement aggregate grain size on tyre?pavement contact interaction during the late stages of pavement skid resistance. First, hemispherical shells 7, 9, and 13 mm in diameter were used to simulate coarse pavement aggre... ver más
Revista: Applied Sciences

 
Alessio Nicosia, Francesco Giuseppe Carollo and Vito Ferro    
Flow resistance in gravel-bed channels is not only affected by the shape and size of the roughness elements, but also by their arrangement on the channel bed surface (position to flow streamlines, spacing between elements, and their protrusion from the c... ver más
Revista: Water

 
Grzegorz Ludwik Golewski    
This work presents a discussion of the basic properties of broken mineral limestone aggregates with the specification of the properties affecting the fracture toughness of concretes made with these aggregates. To determine the influence of the grain-size... ver más
Revista: Infrastructures

 
Grzegorz Ludwik Golewski    
This article is devoted to the study of the combined effect of siliceous fly ash (FA), silica fume (SF), and nanosilica (nS) on the cement matrix morphology and size of microcracks occurring in the Interfacial Transition Zone (ITZ) between the coarse agg... ver más
Revista: Applied Sciences