|
|
|
|
|
Jordi Renau Martínez, Víctor García Peñas, Manuel Ibáñez Arnal, Alberto Giménez Sancho, Eduardo López González, Adelaida García Magariño, Félix Terroba Ramírez, Francisco Javier Moreno Ayerbe and Fernando Sánchez López
This article presents the design and manufacturing of a hydrogen-powered unmanned aquatic surface vehicle (USV) hull. The design process comprised three stages: (1) defining the requirements for a preliminary geometry, (2) verifying the hydrodynamic hull...
ver más
|
|
|
|
|
|
|
|
|
Alessandro Capone, Francisco Alves Pereira and Fabio Di Felice
The design of super-cavitating propellers takes advantage of the development of air cavities on the blades? surface to reduce drag and, ultimately, increase efficiency. The mechanism of flow modification induced by the development of a cavity on the prop...
ver más
|
|
|
|
|
|
|
|
|
Juraj Ru?barský
In the experiment, the roughness was measured on a machined surface with high gloss, which was also the main requirement for the test samples. For this reason, the samples made of stainless steel A304 and aluminum alloy AW 2017 were created by a progress...
ver más
|
|
|
|
|
|
|
|
|
Sabina Cherneva, Vladimir Petrunov, Vladimir Petkov, Vladimir Bogdanov and Silviya Simeonova
The mechanical properties, structure, and morphology of milled and 3D-printed Ti-6Al-4V alloys produced by selective laser melting were investigated in this study. The mechanical properties were investigated by means of nanoindentation, a tensile test, a...
ver más
|
|
|
|
|
|
|
|
|
Suzana Petrovic, Nevena Bo?inovic, Vladimir Rajic, Danijela Stanisavljevic Ninkovic, Danilo Kisic, Milena J. Stevanovic and Emmanuel Stratakis
Arranged patterns obtained via ultrafast laser processing on the surface of Ti/Cu/Ti/Si and Ti/Zr/Ti/Si thin-film systems are reported. Two differently designed multilayer thin films Ti/Cu/Ti/Si and Ti/Zr/Ti/Si were deposited on silicon using the ion spu...
ver más
|
|
|
|