Resumen
To study the effect of the local corrosion of prestressed steel strands on the shear failure mode and shear bearing capacity of concrete beams, unilateral steel strands in four post-tensioning prestressed concrete (PC) beams are corroded, and the shear test of four PC beams are performed. Moreover, a simplified calculation method for the shear bearing capacity of concrete beams with diagonal steel bars is proposed considering the effect of cross-sectional reduction of steel bars, the degradation of mechanical properties, and the cross-sectional damage of concrete. Results shows that the crack propagation mode and failure mode are unrelated to the corrosion of prestressed steel bars when the shear span ratio of beam is the same. The shear capacity of the beam decreases with the increase of corrosion rate, but the decreasing rate is lower than the increasing rate of the corrosion rate. The growth rate of stirrup stress is much greater than that of load after concrete tension and compression loss cracking, and the yield of stirrup can be used as a sign of the ultimate bearing capacity of the beam. In addition, by comparing the experimental and numerical simulation results, the proposed simplified calculation method for the shear bearing capacity of concrete beams is of high accuracy.