Inicio  /  Applied Sciences  /  Vol: 10 Par: 15 (2020)  /  Artículo
ARTÍCULO
TITULO

Assessment of Static Positioning Accuracy Using Low-Cost Smartphone GPS Devices for Geodetic Survey Points? Determination and Monitoring

Marcin Uradzinski and Mieczyslaw Bakula    

Resumen

Recent developments enable to access raw Global Navigation Satellite System (GNSS) measurements of mobile phones. Initially, researchers using signals gathered by mobile phones for high accuracy surveying were not successful in ambiguity fixing. Nowadays, GNSS chips, which are built in the latest smartphones, deliver code and primarily carrier phase observations available for detailed analysis in post-processing applications. Therefore, we decided to check the performance of carrier phase ambiguity fixing and positioning accuracy results of the latest Huawei P30 pro smartphone equipped with a dual-frequency GNSS receiver. We collected 3 h of raw static data in separate sessions at a known point location. For two sessions, the mobile phone was mounted vertically and for the third one?horizontally. At the same time, a high-class geodetic receiver was used for L1 and L5 signal comparison purposes. The carrier phase measurements were processed using commercial post-processing software with reference to the closest base station observations located 4 km away. Additionally, 1 h sessions were divided into 10, 15, 20 and 30 min separate sub-sessions to check the accuracy of the surveying results in fast static mode. According to the post-processing results, we were able to fix all L1 ambiguities based on Global Positioning System (GPS)-only satellite constellation. In comparison to the fixed reference point position, all three 1 h static session results were at centimeters level of accuracy (1?4 cm). For fast static surveying mode, the best results were obtained for 20 and 30 min sessions, where average accuracy was also at centimeters level.

 Artículos similares

       
 
Youli Qiu, Yu Liu, Min Wu, Jie Li, Ruimin He, Chunming Hao, Xing Fan and Chaoxing Sun    
The composition of emulsion is complex. In the process of coal mining, the emulsion required by the hydraulic equipment can enter the mine water through a variety of channels, thereby affecting the water quality of the mine. In this study, the mine water... ver más
Revista: Water

 
Marco Menegozzo, Andrés Cecchini, Ryan Christian Ogle, Uday Kumar Vaidya, Isaac Acevedo-Figueroa and Jaine A. Torres-Hernández    
Honeycomb cores are widely used in the aerospace and automotive fields as a part of protective structures. Unfortunately, standard prismatic honeycomb cores offer a limited amount of energy absorption under lateral loads and suffer from degradation of th... ver más
Revista: Aerospace

 
Hongjun Cui, Guang Chen, Minqing Zhu, Yue Su and Jingxuan Liu    
A scientifically accurate assessment of tunnel health is the prerequisite for the safe maintenance and sustainability of the in-service road tunnel. The changing trend of tunnel health is not considered in existing research. Most evaluation indicators ar... ver más
Revista: Applied Sciences

 
Hewei Liu, Kun Liu, Xiufei Wang, Zhenguo Gao and Jiaxia Wang    
This paper presents an experimental, numerical, and analytical study of a novel specimen subjected to local in-plane load, to investigate its crushing deformation and resistance. The specimen was designed and fabricated to simplify the cruciform structur... ver más

 
Alexios Alexiou, Ioannis Kolias, Nikolaos Aretakis and Konstantinos Mathioudakis    
An approach for preliminary aero-engine design, incorporating a mean-line code for the design of axial-flow, multi-stage compressors, is presented. The compressor mean-line code is developed and integrated within a framework for the preliminary design an... ver más
Revista: Aerospace