Resumen
In the paper, a novel design of a wideband power splitter for a four-element antenna array using two RF antiphase segments is proposed. Based on a detailed analysis of the power splitter circuit, an analytical model was set up in the MATLAB environment. The derived analytical model allows the development of a design of the described structure for any operating frequency and estimates the properties of the designed structure. In addition to the RF electrical part, the copper cover is also considered in this study. The copper cover serves as both a support and shielding part of the proposed structure. The electrical part consists of two sections of transmission lines. The first transmission line is symmetrical, while the second transmission line is asymmetrical. The given transmission lines can be realized using any technology (microstrip, coaxial, etc.). A prototype of the proposed wideband splitter operating at 650 MHz with a fractional bandwidth of 84.3% was designed and tested in real-world conditions to prove the concept. The board of the manufactured prototype has dimensions of 25 × 152 mm. A double-sided FR4 material with a substrate height of 1.48 mm, copper thickness of 50μ" role="presentation" style="position: relative;">50µ50µ
50
µ
m, and ϵr" role="presentation" style="position: relative;">?????r
?
r
? 4.3, with a dielectric loss tangent of 0.021 was used to manufacture the prototype. The prototype was tested and its parameters were verified in practical conditions as a part of the current radio communication system for the 5G band. Under these conditions, verification measurements of the proposed splitter with a four-element antenna array were carried out.