Inicio  /  ChemEngineering  /  Vol: 7 Par: 4 (2023)  /  Artículo
ARTÍCULO
TITULO

Development of Mosquito-Repellent Camouflage Fabric Using Eucalyptus Oil with Moringa oleifera Gum

Faiza Anwar    
Mudassar Abbas    
Mumtaz Hasan Malik    
Amna Aziz Cheema    
Suniya Tariq    
Warda Afzal and Asfandyar Khan    

Resumen

Military personnel are exposed to several harsh conditions and mosquitos in mountains and wild forests. Mosquito-repellent textiles can help them to cope with such conditions. The present research work established a sustainable approach for fabricating microcapsules from Eucalyptus oil, Moringa oleifera, and Arabic gum via a complex coacervation method. Moringa oleifera and Arabic gums were utilized as the outer shell of the microcapsules, whereas the core part was made of Eucalyptus oil in different concentrations. The military camouflage-printed polyester/cotton (PC) blended fabric was coated with the as-prepared microcapsules using the pad?dry?cure technique. The surface morphology of the microcapsules was examined using an optical microscope and scanning electron microscope (SEM), and the coated fabric?s mosquito-repellent property was investigated using a specified cage test according to a standard testing protocol. The water absorbency and air permeability of the treated samples were also evaluated in order to learn about the comfort properties. The cage test results revealed that the coated fabric had a good tendency to repel the mosquitoes used in the cage test. In addition, the coated fabric showed significant durability even after several rigorous washing cycles. However, the application of microcapsules to the fabric slightly affected the water absorbency and air permeability of the fabric. This study presents a novel sustainable approach for fabricating microcapsules from the mentioned precursors and their application in the field of textiles, particularly for military purposes.

 Artículos similares

       
 
Tingting Ding, Xiaoxing Yan and Wenting Zhao    
Microcapsules have received a great deal of attention from researchers due to their excellent properties, and are commonly prepared by interfacial and in situ polymerisation methods. In situ polymerisation is an important method of microcapsule preparati... ver más
Revista: Coatings

 
Xiaoxing Yan, Wenting Zhao and Xingyu Qian    
The purpose of this paper was to discuss the best coating technology of water-based coatings containing microcapsules, and the anti-aging and self-repairing properties of water-based coatings containing microcapsules. Urea-formaldehyde encapsulated Nippo... ver más
Revista: Applied Sciences

 
Xiaoxing Yan and Wenwen Peng    
Urea formaldehyde coated waterborne acrylic resin microcapsules with core-wall ratios of 0.30, 0.45, 0.60, 0.67, and 0.75, and mass fractions of 1.0%, 4.0%, 7.0%, 10.0%, 13.0%, and 16.0% were prepared by in situ polymerization. Their micro morphology was... ver más
Revista: Coatings

 
Yijuan Chang and Xiaoxing Yan    
A self-repairing microcapsule was prepared by emulsion polymerization using melamine formaldehyde resin (MF) as wall material, and a mixture of shellac solution and water-based coating as core material. The orthogonal experiment was carried out through f... ver más
Revista: Coatings

 
Xiaoxing Yan and Yijuan Chang    
In this paper, melamine?formaldehyde (MF) was used as the wall material, and epoxy resin was used as the core material to prepare microcapsules. The optical properties, mechanical properties and ageing resistance of waterborne topcoat were investigated b... ver más
Revista: Coatings