Resumen
The present study employs numerical simulations to investigate vertical wall abutment scour with different aspect ratios (B/L, where B is the abutment length in the flow direction, and L is the abutment length transverse to the flow direction) under the combined effect of waves and current. The numerical model solves the Reynolds-averaged Navier?Stokes (RANS) equations and incorporates the Exner formulation to account for bed-level changes. The utilization of the Level Set Method (LSM) in the present numerical model enhances the accurate tracking of free surface and sediment bed. The numerical model validation was performed using a truncated numerical wave tank. The validated model was utilized to examine scour around vertical wall abutments with varying aspect ratios under different wave-current flows. The highest and lowest abutment scour depths were observed for aspect ratios of 0.5 and 2, respectively, in both steady current and the combined effects of waves and current. The vertical wall abutment of aspect ratio 0.5 had a maximum normalized equilibrium scour depth (S/B, where S is equilibrium scour depth), primarily attributed to a sharp edge, leading to increased turbulence and forming a strong primary vortex. The results suggest that the increase in the aspect ratio of the vertical wall abutment decreases the normalized equilibrium scour depth (S/B). According to the authors? knowledge, this study is the first of its kind that utilizes a three-dimensional, semi-coupled model to examine combined wave- and current-flow-induced scour at vertical wall abutments with varying aspect ratios.