Inicio  /  Coatings  /  Vol: 9 Par: 11 (2019)  /  Artículo
ARTÍCULO
TITULO

Preparation and Performance Optimization of Original Aluminum Ash Coating Based on Plasma Spraying

Hongjun Ni    
Jiaqiao Zhang    
Shuaishuai Lv    
Xingxing Wang    
Yu Zhu and Tao Gu    

Resumen

As an industrial solid waste, the original aluminum ash (OAA) will cause serious pollution to the air and soil. How to reuse the OAA has been a research difficulty. Thus, a method of preparing a plasma spray powder using OAA is proposed. The OAA was hydrolyzed and ball milled, and the flowability of original aluminum ash spray powder (OAASP) was evaluated by the angle of repose. The coating properties were determined via analyzing the microstructure and the phase of the coating, and the effects of plasma spray parameters on the coating properties were investigated by the orthogonal experiment to optimize spray parameters. The results show that the angle of repose of OAASP after granulation was less than 40°, which met the requirements of plasma spraying. When the spraying current was 600 A, the spraying voltage was 60 V, the main gas flow was 33 slpm, and the powder flow rate was 22 g/min, and the prepared original aluminum ash coating (OAAC) had excellent comprehensive performance. After the spraying process parameters were optimized, the microhardness of the coating was 606.54 HV, which is about twice the hardness of the substrate; the abrasion rate was 12.86 × 10-3 g/min; the porosity was 0.16%; and the adhesive strength was 16 MPa. When the amount of Al2O3 added was 50%, the hardness of the coating was increased by 17.61%.

 Artículos similares

       
 
Pengfei Sun, Jun Wei, Yaoyao Gao, Zuhao Zhu and Xiao Huang    
Immobilized microbial materials can effectively remove pollutants from surface water, and a biochar/clay composite particle (BCCP) material is prepared with immobilized Flavobacterium mizutaii sp. and Aquamicrobium sp. to remove ammonia nitrogen (NH4+?N)... ver más
Revista: Water

 
Chunyang Yu, Chunyi Cui, Jiuye Zhao, Fang Liu, Jian Su and Jia Yuan    
A continuous treatment process using steel slag powder including foam drying and carbonation processes (termed the SSFD-C method) is a novel technology previously developed in our laboratory. It has achieved the first application of carbonation solidific... ver más

 
Yehia Ibrahim Alzoubi, Ahmet E. Topcu and Ahmed Enis Erkaya    
The growth in textual data associated with the increased usage of online services and the simplicity of having access to these data has resulted in a rise in the number of text classification research papers. Text classification has a significant influen... ver más
Revista: Applied Sciences

 
Janat Musayev, Algazy Zhauyt, Sarakul Ismagulova and Saltanat Yussupova    
In the interaction of the rolling stock and the upper structure of the railway track, intense dynamic loads occur. They have a destructive effect both on the parts of the rolling stock and on the elements of the superstructure of the track. In order to d... ver más
Revista: Applied Sciences

 
Mohammed Baljon and Sunil Kumar Sharma    
Every farmer requires access to rainfall prediction (RP) to continue their exploration of harvest yield. The proper use of water assets, the successful collection of water, and the successful pre-growth of water construction all depend on an accurate ass... ver más
Revista: Water