Inicio  /  Infrastructures  /  Vol: 7 Par: 3 (2022)  /  Artículo
ARTÍCULO
TITULO

Bio-Wastes as Aggregates for Eco-Efficient Boards and Panels: Screening Tests of Physical Properties and Bio-Susceptibility

Eleonora Cintura    
Paulina Faria    
Marta Duarte and Lina Nunes    

Resumen

Screening tests were developed or adapted from RILEM recommendations, standards and past studies, and carried out to characterize some agro-industrial wastes and to assess their feasibility as aggregates for eco-efficient building composites. Spent coffee grounds, grape and olive press waste and hazelnut shells were used, as well as maritime pine chips as control material. Particle size distribution, loose bulk density, thermal conductivity and hygroscopicity properties were analysed. The selected bio-wastes did not show good thermal insulation properties if compared with some bio-wastes already studied and used for thermal insulation composites. Values of loose bulk density and thermal conductivity were between 325.6?550.5 kg/m3 and 0.078?0.107 W/(m·K); moisture buffering values higher than 2.0 g/(m2·%RH). Biological susceptibility to mould and termites were also tested, using not yet standardized methods. The low resistance to biological attack confirms one of the greatest drawbacks of using bio-wastes for building products. However, final products properties may be changed by adding other materials, pre-treatments of the wastes and the production process.

 Artículos similares

       
 
Ping Chen, Lufeng Nie, Jinrun Kang and Heng Liu    
With urban development and renewal, underground space is becoming more utilized. The design and use of open underground public space entrances and exits have become more and more frequent. As a pedestrian passage connecting indoors and outdoors, the wind... ver más
Revista: Buildings

 
Yan Xi, Junhao Xing, Jiajia Feng, Congming Ma, Xiutian Yang, Yudong Tian and Xin Liu    
Cement has been widely used as a structural material in many underground projects, and these projects often face high- or ultra-high-temperature environments, leading to the deterioration of the mechanical, porosity, and permeability properties of set ce... ver más
Revista: Buildings

 
Kunda Chamatete and Çaglar Yalçinkaya    
Three-dimensional concrete printing (3DCP) is of great interest to scientists and the construction industry to bring automation to structural engineering applications. However, studies on the thermal performance of three-dimensional printed concrete (3DP... ver más
Revista: Buildings

 
Yijia Zhou, Hang Yu, Maohui Luo and Xiang Zhou    
Thermal sensation prediction models can help to evaluate complex thermal environments and guide the environment conditioning strategy. However, most existing models are established basing on the thermal status of the entire human body or local body parts... ver más
Revista: Buildings

 
Stefania Perrella, Fabio Bisegna, Piero Bevilacqua, Daniela Cirone and Roberto Bruno    
In the EU, the building sector is responsible for 40% of the global energy consumption for final uses and 36% of the carbon dioxide (CO2) emissions. Heat pumps allow for the replacement of conventional systems based on fossil fuels with the perspective o... ver más
Revista: Buildings