Resumen
In this article, a layered shell element-based, elastic finite element method for predicting welding distortion in multi-pass welding is developed. The welding distortion generated in each pass can be predicted by employing layer-by-layer equivalent plastic strains as thermal expansion coefficients and using the heat-affected zone (HAZ) width as the mesh size. The final distortion can be expressed as the sum of the distortions for each pass. This study focuses on extraction of the equivalent plastic strain and HAZ width through 3D thermal elastic plastic analysis (TEPA) for each pass. The input variables extracted from each pass can be converted and added to simulate the final distortion of the multi-pass welding. A 10 mm thick, multi-pass butt-welded joint, subjected to three passes, is simulated via the proposed method. The predicted welding distortion is compared with the 3D TEPA results and the measured experimental data. The outcome indicates that good agreement can be obtained.