Inicio  /  Applied Sciences  /  Vol: 13 Par: 24 (2023)  /  Artículo
ARTÍCULO
TITULO

The Nonlinear Dynamic Characteristics of an Industrial Turbine Engine with Eccentric Squeeze Film Dampers

Shan Zeng    
Sigui Luo    
Fei Wang    
Xifan Lan    
Xinrui Ma and Yuxin Lu    

Resumen

Squeeze film dampers are often used to suppress vibration in turbine engines and play an important role in rotor systems. In this paper, the nonlinear dynamic characteristics of an industrial turbine engine fitted with squeeze film dampers are investigated with the static eccentricity of the SFDs. A recently developed time domain technique that combines the finite element method and the fixed interface modal synthesis method is applied to predict the nonlinear unbalance response of the industrial turbine engine under different unbalanced and static eccentricity configurations. By comparing the results obtained using SFDs with and without static eccentricity, it can be concluded that increasing the static eccentricity of the SFDs promotes non-periodic motion, while an increase in the unbalance level promotes the jump phenomenon. The efficiency of the rotor system would improve with an appropriate amount of unbalance applied to compressor IV, resulting in a reduction in the vibration level. If static sprung eccentricity occurs, the center of the journal orbit would be offset from the SFD center, rendering it inefficient or even leading to rub impact. Therefore, it is crucial to control the static eccentricity of the SFDs for optimal performance. The time domain technique is verified by the experimental results reported in the literature.

 Artículos similares

       
 
Zhongchu Tian and Binlin Xu    
As important load-bearing structures, suspension cables have been widely used in suspension bridges, engineering ropeways, cable suspension systems and other special equipment. Their dynamic problems have always been a research hotspot. Especially for co... ver más
Revista: Applied Sciences

 
Hanwen Yu, Guiyuan Zheng, Yandong Liu, Jiajia Zhao, Guozhao Wei and Hongkui Jiang    
The potential applications of the dual linear-motor differential-drive system and the numerical analysis results are applicable to high-end equipment fields like suspensions, robotics, optoelectronics, powertrain, integrated electronics, national defense... ver más
Revista: Applied Sciences

 
Qi Hong, Tianyi Zhou and Junde Qi    
Polishing force is one of the key process parameters in the polishing process of blisk blades, and its control accuracy will affect the surface quality and processing accuracy of the workpiece. The contact mechanism between the polishing surface and flap... ver más
Revista: Applied Sciences

 
Shuang Ruan, Ming Zhang, Shaofei Yang, Xiaohang Hu and Hong Nie    
A dynamic model is established to investigate the shimmy instability of a landing gear system, considering the influence of nonlinear damping. The stability criterion is utilized to determine the critical speed at which the landing gear system becomes un... ver más
Revista: Aerospace

 
Cesare Patuelli, Enrico Cestino and Giacomo Frulla    
Vibration analysis of wing-box structures is a crucial aspect of the aeronautic design to avoid aeroelastic effects during normal flight operations. The deformation of a wing structure can induce nonlinear couplings, causing a different dynamic behavior ... ver más
Revista: Aerospace