Resumen
Global ship analysis is conducted using a finite element model (FE model) for ship design and construction, which involves structural, motion, and vibration analyses. It is crucial to examine the structural safety of the hull and motion response. In the ship FE model used in global ship analysis, weight distribution is employed to adjust the light weight and center of gravity (COG), which are required to perform the analysis. Further, the FE model needs to satisfy the required longitudinal shear force (SF) and bending moment (BM) under the loading conditions of the ship. Moreover, the SF and BM in the ship Trim and Stability data are utilized to perform shear force tuning (SFT) and bending moment tuning (BMT) for the ship FE model. This ensures the ship model exhibits curves of the SF and BM that coincide with those of the ship. The SFT and BMT for the ship FE model are time-consuming and costly. Thus, to address these limitations, we propose an effective and accurate algorithm and program for SFT and BMT. Accordingly, we developed a C#-based algorithm to tune the weight, SF, BM, and COG of the ship FE model to the required target value. Finally, the accuracy of the newly developed algorithm was analyzed and compared by applying it to the shuttle tanker FE model under the ballast and full load conditions. Accuracy was within tolerance in both loading conditions. The average errors of SF and BM were smaller in the ballast condition than in the full load condition, and the errors were smaller at the bow than at the stern.