Inicio  /  Coatings  /  Vol: 12 Par: 7 (2022)  /  Artículo
ARTÍCULO
TITULO

Shear and Tensile Behaviors of Fiber-Reinforced Resin Matrix Composites Printed by the FDM Technology

Yuexi Zhuang    
Bin Zou    
Shouling Ding and Peng Wang    

Resumen

Resin/fiber composites were prepared by the FDM printing technology. The effects of arrangements, types (carbon, glass, and Kevlar), and volume fraction of fibers on the shear and tensile properties of resin 3D-printed composites are investigated in this paper. The experimental results show that the addition of continuous fibers increases the shear strength and tensile strength of FDM-3D-printed composites, but the strength will not keep increasing with an increase in the fiber content. As the fiber content increases, the print quality decreases, and the porosity between the fibers increases. The enhancement degree of the shear stress of specimens by different fiber types can be classified as follows: glass fiber > carbon fiber > Kevlar fiber. Notch sensitivity is reduced when the 90° arrangement of fibers is added, while the addition of 0° arranged fibers will improve the notch sensitivity of the sample. The research results of this paper have an important guiding significance for selecting fiber types and arrangement mode of notched components in engineering applications.

 Artículos similares

       
 
Hee-Seon Bang, Jong-Chan Kim, Bum-Su Go, Dong-Won Choi and Hyo-Sung Kim    
Recently, for the high performance of automobiles, the application ratio of zinc-coated steel sheets with excellent corrosion resistance has been increasing. However, it is difficult to achieve sound welds, as porosities form from zinc during welding. In... ver más
Revista: Applied Sciences

 
Tao Wang, Yu Xiang, Liyuan Liu and Wang Xiong    
Relying on the Mawan undersea large-diameter, dual-line, mud?water-balanced shield tunnel project and focusing on the characteristics of the tunnel, such as the complex geological conditions at the expected intersection location and the existence of a su... ver más

 
Rafael Ramirez, Rosana Muñoz and Paulo B. Lourenço    
This paper presents an experimental and analytical methodology for the mechanical characterization of metal anchors in ancient brick masonry walls. The presented results contribute to the identification of the most efficient anchoring systems for strengt... ver más
Revista: Applied Sciences

 
Yehuan Wang, Yong Wang, Yanli Wang, Cheng Chen, Lingwei Kong and Mengbing Xu    
Marine sediment is an important channel for methane leakage from the earth interior to the atmosphere. The investigation of gas invasion in fine-grained marine sediments is of great theoretical and practical significance in marine science and engineering... ver más

 
Zhijie Sun, Pengfei Li, Xiuli Du and Xuanyu Yang    
There are a large number of structural planes distributed in the surrounding rock of a tunnel, and this is one of the key factors causing a tunnel?s instability. Due to different geological and historical conditions, the distribution characteristics and ... ver más
Revista: Applied Sciences