Resumen
The deformation of the cylinder has been proved to greatly reduce the fluctuation of lift and the vortex-induced vibration. In this article, a new form of deformation mode for the smooth cylinder is proposed in order to reduce the vortex-induced vibrations, which can be applied to marine risers and submarine pipelines to ensure the working performance and safety of offshore platforms. Large eddy simulation (LES) is adopted to simulate the turbulent flow over wavy cylinders with three different twisted angles at a subcritical Reynolds number Re = 28,712. Comparing with the results of smooth cylinder, the maximum drag and lift reduction of wavy cylinder A3 with a = 40° can reach 17% and 84%, respectively, and the corresponding vortex formation length increases significantly, while the turbulence intensity decreases relatively. Meanwhile, the circumferential minimum pressure coefficient is greater than that of the smooth cylinder, which also provides a greater drag reduction for the cylinder. The surface separation line, turbulent kinetic energy distribution, and wake vortex structure indicate that the elongation of separated shear layer and wake shedding position is larger than that of the smooth cylinder, and the vorticity value in the near wake region decreases. A periodic vortex structure is generated along the spanwise direction, and a weaker and more stable Karman vortex street is reformed at a further downstream position, which ultimately leads to the reduction of drag and fluctuating lift of the wavy cylinder.