Inicio  /  POWDER TECHNOLOGY  /  Vol: 110 Núm: 1-2 Par: 0 (2000)  /  Artículo
ARTÍCULO
TITULO

Axial and lateral solids distribution modeling in the upper region of circulating fluidized beds

Hyre    
M.R.    
Glicksman    
L.R.    

Resumen

No disponible

 Artículos similares

       
 
Nurhusna Najeha Amran, Khairul Salleh Basaruddin, Muhammad Farzik Ijaz, Haniza Yazid, Shafriza Nisha Basah, Nor Amalina Muhayudin and Abdul Razak Sulaiman    
Spinal deformity refers to a range of disorders that are defined by anomalous curvature of the spine and may be classified as scoliosis, hypo/hyperlordosis, or hypo/hyperkyphosis. Among these, scoliosis stands out as the most common type of spinal deform... ver más
Revista: Applied Sciences

 
Federico Valenzuela-Beltrán, Mario D. Llanes-Tizoc, Edén Bojórquez, Juan Bojórquez, Robespierre Chávez, Jesus Martin Leal-Graciano, Juan A. Serrano and Alfredo Reyes-Salazar    
The response of steel moment frames is estimated by first considering that the mass matrix is the concentrated type (ML) and then consistent type (MC). The effect of considering more than one element per beam is also evaluated. Low-, mid- and high-rise f... ver más
Revista: Applied Sciences

 
Pankaj Bariker and Sreevalsa Kolathayar    
High-rise building safety is generally supported by pile-mat systems. They must be sturdy enough to withstand potential lateral loads brought on by earthquakes, wind, dredging, and machine vibrations, in addition to increased axial loads. An innovative p... ver más
Revista: Infrastructures

 
Pinle Zhang, Jinyulin Wang and Junfang Gao    
Six RC short-limb shear walls with an L-shaped section, constructed with high-strength rebar and high-strength concrete, were loaded to destruction with pseudo-static loading. Experimental results were discussed and compared with L-shaped RC short-limb s... ver más
Revista: Applied Sciences

 
Zhenkui Wang and C. Guedes Soares    
Buckle-initiation techniques, such as sleepers, are usually installed to trigger lateral buckling at pre-designated locations to release the axial compressive forces induced by thermal loading. Taking the nonlinear pipe?soil interaction model into accoun... ver más