Redirigiendo al acceso original de articulo en 17 segundos...
ARTÍCULO
TITULO

Compressive Strength of Post Fire Exposed Concrete Column Wrapped with Fiber Reinforced Polymer

Dwi Agus Setiawan Wardaya    
Handoko Sugiharto    
Pamuda Pudjisuryadi    

Resumen

In this study, behaviour of reinforced concrete columns strengthened using fiber reinforced polymer (FRP; glass fiber and carbon fiber) after fire exposure are discussed. After being exposed to fire as high as 720oC for 180 minutes, the specimens showed concrete and  reinforcement strength degradation, even though there was no carbonation. It was found that specimens wrapped by carbon fiber showed better compressive strength but less ductility compared to specimens wrapped by glass fiber. It was also found that the low initial compressive strength did not decrease FRP confinement effectiveness. Increase of wrapped concrete com­pressive strength was evident despite the low initial strength (<17 MPa). Strength esti­mation using ACI 440.2R-08 formula, which is originally for wrapped plain concrete without fire heat exposure, underestimated the compressive strength. In the proposed formula, the initial compressive strength (f?co) should be adjusted by considering the modulus elasticity and strain limitation to have more precise estimation.  

 Artículos similares

       
 
Anna Chomicz-Kowalska and Krzysztof Maciejewski    
This paper investigates the effects of incorporating dispersed fibrous reinforcement in hydraulically bound granular 0/16-mm mixtures. The evaluated fibrous reinforcement comprised a mixture of polypropylene and alkali-resistant glass fibers in a 1:2 wei... ver más
Revista: Applied Sciences

 
Yadong Zheng, Lianying Zhang, Peng Wu, Xiaoqian Guo, Ming Li and Fuqiang Zhu    
The physical and mechanical properties of rocks change significantly after being subjected to high temperatures, which poses safety hazards to underground projects such as coal underground gasification. In order to investigate the effect of temperature o... ver más
Revista: Applied Sciences

 
Matija Zvonaric, Mirta Ben?ic, Ivana Bari?ic and Tihomir Dok?anovic    
The high stiffness of cement-bound aggregate (CBA) is recognized as its main drawback. The stiffness is described by the modulus of elasticity, which is difficult to determine precisely in CBA. Incorporating rubber in these mixtures reduces their stiffne... ver más
Revista: Applied Sciences

 
Kre?imir Nincevic, Thierry Guillet, Omar Al Mansouri and Roman Wan-Wendner    
This contribution summarizes the largest available literature data collection on tensile and shear loaded anchor tests, obtained in two independent studies and performed by two different research groups. It was the objective of the two studies to investi... ver más
Revista: Applied Sciences

 
?iga Unuk and Milan Kuhta    
A nonlinear semi-numeric and finite element analysis of three-point bending tests of notched polymer fiber-reinforced concrete prisms was performed. The computational and experimental results were compared in terms of the load-displacement behavior. The ... ver más
Revista: Applied Sciences