Redirigiendo al acceso original de articulo en 23 segundos...
Inicio  /  Coatings  /  Vol: 8 Núm: 7 Par: July (2018)  /  Artículo
ARTÍCULO
TITULO

Catalytic Performance of Ag2O and Ag Doped CeO2 Prepared by Atomic Layer Deposition for Diesel Soot Oxidation

Tatiana V. Ivanova    
Tomá? Homola    
Anton Bryukvin and David C. Cameron    

Resumen

The catalytic behaviour of Ag2O and Ag doped CeO2 thin films, deposited by atomic layer deposition (ALD), was investigated for diesel soot oxidation. The silver oxide was deposited from pulses of the organometallic precursor (hfac)Ag(PMe3) and ozone at 200 °C with growth rate of 0.28 Å/cycle. Thickness, crystallinity, elemental composition, and morphology of the Ag2O and Ag doped CeO2 films deposited on Si (100) were characterized by ellipsometry, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and field emission scanning electron microscopy (FESEM), respectively. The catalytic effect on diesel soot combustion of pure Ag2O, CeO2, and Ag doped CeO2 films grown on stainless steel foil supports was measured with oxidation tests. Nominally CeO2:Ag 10:1 doped CeO2 films were most effective and oxidized 100% of soot at 390 °C, while the Ag2O films were 100% effective at 410 °C. The doped films also showed much higher stability; their performance remained stable after five tests with only a 10% initial reduction in efficiency whereas the performance of the Ag2O films reduced by 50% after the first test. It was concluded that the presence of Ag+ sites on the catalyst is responsible for the high soot oxidation activity.

Palabras claves

 Artículos similares

       
 
Jing Wang, Huanyu Zhou, Li Ma, Quanfeng Wang, Da Sun, Libo Jin, Guoming Zeng and Jujiao Zhao    
Peroxymonosulfate (PMS) activation has gained increasing attention for its water remediation. In this work, carbon nanotube-supported FeCo2O4 nanoparticles (FeCo2O4/CNT) were prepared and showed tremendous potential as a catalyst for PMS activation. The ... ver más
Revista: Water

 
Laith S. Sabri, Abbas J. Sultan, Jamal M. Ali, Hasan Shakir Majdi and Muthanna H. Al-Dahhan    
Fluidized bed reactors are essential in a wide range of industrial applications, encompassing processes such as Fischer?Tropsch synthesis and catalytic cracking. The optimization of performance and reduction in energy consumption in these reactors necess... ver más
Revista: ChemEngineering

 
Lintao Liu, Wei Li, Zhengxian Li, Fei He and Haibing Lv    
The metal-free synthesis of graphene films on Si substrates, the most common commercial semiconductors, is of paramount significance for graphene application on semiconductors and in the field of electronics. However, since current research mainly uses C... ver más
Revista: Coatings

 
Jiancong Liu, Manhong Ji, Jiabao Qin, Jia Zhu and Suiyi Zhu    
Waste oil scum is commonly discharged during the air flotation process at oil-bearing wastewater treatment plants and disposed as an additive in cement kilns and/or furnaces. Herein, it was mixed with a magnetite-rich waste sludge and then completely rec... ver más
Revista: Water

 
Loris Barillari, Augusto Della Torre, Gianluca Montenegro and Angelo Onorati    
In the last decade, additive manufacturing (AM) techniques have been progressively applied to the manufacturing of many mechanical components. Compared to traditional techniques, this technology is characterized by disruptive potential in terms of the co... ver más
Revista: Applied Sciences