Redirigiendo al acceso original de articulo en 22 segundos...
Inicio  /  Aerospace  /  Vol: 10 Par: 12 (2023)  /  Artículo
ARTÍCULO
TITULO

Adaptive Feed-Forward Control for Gust Load Alleviation on a Flying-Wing Model Using Multiple Control Surfaces

Liqi Zhang and Yonghui Zhao    

Resumen

Based on measured gust information, a multi-input multi-output (MIMO) adaptive feed-forward control scheme for gust load alleviation (GLA) on a semi-span flying-wing aircraft using multiple control surfaces is proposed. In order to remedy weight drift and biased estimation problems that are commonly encountered in adaptive control, the circular leaky LMS (CLLMS) algorithm is employed, which utilizes gust measurement information, filtered reference signals, and error signals to update controller parameters online. The results demonstrate that good load reductions are achieved in both continuous and discrete gust environments. For instance, the designed GLA control system leads to an 80.72% reduction in the root-mean-square (RMS) values of wing-root bending moment in the Dryden gust environment and a 77.59% reduction of its maximum value in the 1-cos discrete gust condition. Based on the limited power of the actuator and the limited authority for control surface deflections when integrating GLA into the flight control system, a weight-updating algorithm with deflection angle and rate constraints on control surfaces is proposed. The simulation results show that the strict constraints on control surface deflections will degrade the GLA performance. Finally, the influence of the partial jamming fault of actuators on GLA performance is studied. It is found that good GLA performance can be preserved despite the degraded performance during the initial stage of the actuator jamming fault. This is due to the robustness brought about by multiple control surfaces and the adaptability of the control algorithm.

 Artículos similares

       
 
Mahsa Kashani, Stefan Jespersen and Zhenyu Yang    
The application of deoiling hydrocyclone systems as the downstream of three-phase gravity separator (TPGS) systems is one of the most commonly deployed produced water treatment processes in offshore oil and gas production. Due to the compact system?s com... ver más
Revista: Water

 
Bangchu Zhang, Yiyong Liang, Shuitao Rao, Yu Kuang and Weiyu Zhu    
In hypersonic flight control, characterized by challenges posed by input saturation, model parameter uncertainties, and external disturbances, this paper introduces a pioneering anti-input saturation control method based on RBFNN adaptivity. We have deve... ver más
Revista: Aerospace

 
Sheng Liu, Jian Song, Lanyong Zhang and Yinchao Tan    
The three-degree-of-freedom (3-DOF) stabilized control system for ship propulsion-assisted sails is used to control the 3-DOF motion of sails to obtain offshore wind energy. The attitude of the sail is adjusted to ensure optimal thrust along the target c... ver más

 
Qi Hong, Tianyi Zhou and Junde Qi    
Polishing force is one of the key process parameters in the polishing process of blisk blades, and its control accuracy will affect the surface quality and processing accuracy of the workpiece. The contact mechanism between the polishing surface and flap... ver más
Revista: Applied Sciences

 
Chen Xia, Christian Eduardo Verdonk Gallego, Adrián Fabio Bracero, Víctor Fernando Gómez Comendador and Rosa María Arnaldo Valdés    
This paper investigates the impact of trajectory predictor performance on the encounter probability generated by an adaptive conflict detection tool and examines the flexibility of the tool dependent on its adjustable thresholds, using historical radar t... ver más
Revista: Aerospace