Redirigiendo al acceso original de articulo en 22 segundos...
Inicio  /  Aerospace  /  Vol: 11 Par: 1 (2024)  /  Artículo
ARTÍCULO
TITULO

Large-Eddy Simulations of a Hypersonic Re-Entry Capsule Coupled with the Supersonic Disk-Gap-Band Parachute

Lakshmi Narayana Phaneendra Peri    
Antonella Ingenito and Paolo Teofilatto    

Resumen

The goal of this paper is to investigate the aerodynamic and aerothermodynamic behavior of the Schiaparelli capsule after the deployment of a supersonic disk-gap-band (DGB) parachute during its re-entry phase into the Martian atmosphere. The novelty of this work lies in the investigation by LES (large-eddy simulations) of the coupled interaction of the flow field generated behind the capsule and that in front of the flexible DGB parachute. These simulations are performed at an altitude of 10 km and a Mach number around 2, i.e., a regime in which large canopy-area oscillations are observed. LES results have shown a strong interaction between the bow shock, the recompression and expansion waves, high pressure, density and temperature gradients, heat flux towards the airstream and the body implying turbulence generation, ingestion, and amplification through the shock waves. Vortices released from the capsule at a frequency of about 52 Hz and 159 Hz, corresponding to Strouhal numbers of ~0.2 and 0.75, respectively, are the main factors responsible for the instabilities of the hypersonic re-entry capsule and the disk-gap-band parachute coupled system. The nonlinear turbulence flow field generated at the capsule back is amplified when passing the parachute bow shock, and this is responsible for the non-axisymmetric behavior around and behind the parachute that caused the uncontrolled capsule oscillations and the Schiaparelli mission failure. In fact, an LES of the parachute without the capsule, for the same conditions, show a completely axisymmetric field, varying in time, but axisymmetric. In order to avoid this turbulence amplification, dampening of the vortex shedding is critical. Different techniques have been already proposed for other applications. In the case of capsule re-entry, due to the high temperatures in front of the capsule behind the bow shock since air plasma is generated, damping of the vortex shedding could be achieved by means of magnetohydrodynamic (MHD) control.

 Artículos similares

       
 
John-Paul Mosele, Andreas Gross and John Slater    
Shock wave boundary layer interactions are common to both supersonic and hypersonic inlet flows. Wall-resolved implicit large-eddy simulations of a canonical Mach 2.5 axisymmetric shock wave boundary layer interaction experiment at Glenn Research Center ... ver más
Revista: Aerospace

 
Prateek Kumar Singh, Xiaonan Tang and Hamidreza Rahimi    
Numerous sources of overtopping and flood events suggest different cross-sectional land characteristics of the river and urban river water systems. Multiple stages of floodplains in compound channels are viable in urban areas to facilitate bank slope sta... ver más
Revista: Water

 
Jan Geese, Julian Kimmerl, Marc Nadler and Moustafa Abdel-Maksoud    
The investigation of cavitating trailing vortices emerging from marine propellers is of great interest in the industry. With the help of computational fluid dynamics (CFD), studying the cavitating trailing vortices may be facilitated. However, limitation... ver más

 
Giannino Ponchio Camillo, Alexander Wagner, Takahiko Toki and Carlo Scalo    
This work investigates a hypersonic turbulent boundary layer over a 7°" role="presentation">7°7° 7 ° half angle cone at a wall-to-total temperature ratio of 0.1, M∞=7.4" role="presentation">??8=7.4M8=7.4 M 8 = 7.4 and Re∞... ver más
Revista: Aerospace

 
Mario Hurtado-Herrera, Wei Zhang, Abdelkader Hammouti, Damien Pham Van Bang and Kim Dan Nguyen    
A three-dimensional large eddy simulation model is used to simulate the turbulent flow dynamics around a circular pier in live-bed and clear-water scour conditions. The Navier?Stokes equations are transformed into a ?? s -coordinate system and solved usi... ver más
Revista: Applied Sciences