Redirigiendo al acceso original de articulo en 20 segundos...
Inicio  /  Aerospace  /  Vol: 10 Par: 9 (2023)  /  Artículo
ARTÍCULO
TITULO

Effect of Bending Deformation on the Lateral Force of Spinning Projectiles with Large Aspect Ratio

Qi Liu    
Juanmian Lei    
Yong Yu and Jintao Yin    

Resumen

The bending deformation can affect the lateral force of spinning projectiles with large aspect ratios, thus interfering with their flight stability. Based on the established spin?deformation coupling motion model, the unsteady Reynolds averaged Navier?Stokes (URANS) equations are solved to simulate the flow over a large-aspect-ratio projectile undergoing spin and spin-deformation coupling motion by using the dual-time stepping method and dynamic mesh technique, obtaining the lateral force. Furtherly, the flow mechanism is analyzed for the changed lateral force induced by the bending deformation. The results indicate that the variation of transient lateral force for the head of a projectile is consistent with that of the deformation-induced additional sideslip angle; affected by the deformation-induced compression wave and expansion wave, the time-averaged lateral force for the middle of a projectile will be increased at small angles of attack, but changed little at large angles of attack; at small angles of attack, the change trend of transient lateral force for the tail of a projectile is similar to that of additional angle of attack caused by the deformation; at large angles of attack, the characteristic of phase lag is presented between the transient lateral force for the tail of a projectile and the additional sideslip angle.

 Artículos similares

       
 
Ming Qi, Wenguo Zhu and Shu Li    
For large bird-like flapping wing aircraft, the fluid?structure coupling problem is very important. Through the passive torsional deformation of the wing, sufficient thrust is generated and propulsion efficiency is ensured. Moreover, spanwise bending def... ver más
Revista: Aerospace

 
Ruhao Hua, Qi Chen, Zhao Wan and Hao Chen    
A body flap/RCS-integrated configuration is often used to achieve pitch trimming and controlled flight in near space for hypersonic vehicles. Under the high temperature and pressure load induced by the expansion wave at the nozzle exit, the body flap is ... ver más
Revista: Aerospace

 
M. S. M. Al-kahtani, Han Zhu, Yasser E. Ibrahim, S. I. Haruna and S. S. M. Al-qahtani    
Polymer-modified cement mortar has been increasingly used as a runway/road pavement repair material due to its improved bending strength, bonding strength, and wear resistance. The flexural strength of polyurethane?cement mortar (PUCM) is critical in ach... ver más
Revista: Applied Sciences

 
Sang-Hyun Park, Sang-Hoon Yoon, Teguh Muttaqie, Quang Thang Do and Sang-Rai Cho    
The residual strength of denting- and fracture-damaged box girders were experimentally and numerically investigated. The experiments were conducted under a pure bending moment using the four-point bending test method. The load, deflection, and strain wer... ver más

 
Joo-Shin Park, Dong-Hun Lee and Myung-Su Yi    
As interest in eco-friendly energy development continues to rise, the offshore wind turbine market is growing at a high rate of increase every year. In line with this, the demand for installation vessels with large capacity is also increasing rapidly. WT... ver más