Redirigiendo al acceso original de articulo en 19 segundos...
ARTÍCULO
TITULO

Durability and Compressive Strength of High Cement Replacement Ratio Self-Consolidating Concrete

Osama Mohamed    

Resumen

This study examines durability and mechanical properties of sustainable self-consolidating concrete (SCC) in which 80% of the cement is replaced with combinations of recycled industrial by-products including fly ash, silica fume, and ground granulated blast furnace slag (GGBS). The water to binder (w/b) ratio of SCC mixes studies was maintained at 0.36. The study proposes empirical relationships to predict 28-day compressive strengths based on the results of three-day and seven-day compressive strengths. In addition, the chloride penetration resistance of the various sustainable SCC mixes was determined after three days, seven days, and 28 days of moist curing of concrete standards. It was concluded that fly ash, silica fume, and GGBS contribute favorably to enhancing strength development, fresh properties, and durability of SCC in comparison to ordinary Portland cement (OPC). The compressive strength of the sustainable SCC mixes falls within ranges suitable for structural engineering applications. Replacing cement with 15% silica fume produced a 28-day average compressive strength of 95.3 MPa, which is 44.2% higher than the control mix. Replacing cement with 15% or 20% silica fume reduced the chloride ion permeability to very low amounts compared to high permeability in a control mix.

 Artículos similares

       
 
Vinh Thi Hai Chu, Vinh Duc Bui and Tue Viet Nguyen    
Ultra-High Performance Concrete (UHPC) improves the bearing capacity as well as the durability of structural concrete. This study aims to investigate the constituents of UHPC in both phases: aggregate and cementitious materials. The proper ratio of the m... ver más
Revista: Buildings

 
Sina Nasiri, Rahmat Madandoust and Malek Mohammad Ranjbar    
The impact of the calcination temperature and grinding time on the mechanical properties and durability of limestone-calcined clay concrete (LC3) is crucial. In this research, calcined clay was produced within the temperature range of 700 °C to 900 °C, a... ver más
Revista: Infrastructures

 
Mohamed M. El-Attar, Hatem H. A. Ibrahim and Shereen F. A. Darwish    
The disposal of waste plastic bags (WPB) represents an environmental challenge. Recycling (WPB) in the concrete industry would represent a huge environmental advantage if proven effective and economic. This study aims to investigate the viability of recy... ver más
Revista: Buildings

 
Haneen AlTawaiha, Fadi Alhomaidat and Tamer Eljufout    
The incorporation of nanotechnology has led to significant strides in the concrete industry, ushering in innovative construction methodologies. Various nanomaterials, including nano-silica (NS), have undergone comprehensive scrutiny as potential partial ... ver más
Revista: Infrastructures

 
Seyedsaleh Mousavinezhad, Judit M. Garcia, William K. Toledo and Craig M. Newtson    
For several decades, class F fly ash has been an attractive supplementary cementitious material, at least in part, due to its ability to reduce Portland cement consumption and mitigate alkali-silica reactions in concrete. However, fly ash availability is... ver más
Revista: Buildings