Redirigiendo al acceso original de articulo en 16 segundos...
ARTÍCULO
TITULO

Overtopping Metrics and Coastal Safety: A Case of Study from the Catalan Coast

Corrado Altomare    
Xavi Gironella    
Tomohiro Suzuki    
Giacomo Viccione and Alessandra Saponieri    

Resumen

Design criteria for coastal defenses exposed to wave overtopping are usually assessed by mean overtopping discharges and maximum individual overtopping volumes. However, it is often difficult to give clear and precise limits of tolerable overtopping for all kinds of layouts. A few studies analyzed the relationship between wave overtopping flows and hazard levels for people on sea dikes, confirming that one single value of admissible mean discharge or individual overtopping volume is not a sufficient indicator of the hazard, but detailed characterization of flow velocities and depths is required. This work presents the results of an experimental campaign aiming at analyzing the validity of the safety limits and design criteria for overtopping discharge applied to an urbanized stretch of the Catalan coast, exposed to significant overtopping events every stormy season. The work compares different safety criteria for pedestrians. The results prove that the safety of pedestrians on a sea dike can be still guaranteed, even for overtopping volumes larger than 1,000 L/m. Sea storms characterized by deep-water wave height between 3.6 and 4.5 m lead to overtopping flow depth values larger than 1 m and flow velocities up to 20 m/s. However, pedestrian hazard is proved to be linked to the combination of overtopping flow velocity and flow depth rather than to single maximum values of one of these parameters. The use of stability curves to assess people?s stability under overtopping waves is therefore advised.

 Artículos similares

       
 
Jaifer Corrêa Martins, Cristiano Fragassa, Marcelo Moraes Goulart, Elizaldo Domingues dos Santos, Liércio André Isoldi, Mateus das Neves Gomes and Luiz Alberto Oliveira Rocha    
A numerical study was performed in the present work about an Overtopping Device Wave Energy Converter (OTD-WEC) with one and two ramps incorporated in a real breakwater. The Constructal Design method was applied to evaluate the effects on the average dim... ver más

 
Luuk Barendse, Vera M. van Bergeijk, Weiqiu Chen, Jord J. Warmink, Aroen Mughal, Dorian Hill and Suzanne J. M. H. Hulscher    
Wave overtopping can cause erosion on the landward slope due to high flow velocities and turbulence that cause high stresses on the cover. Innovative block revetments such as Grassblocks protect the subsoil of the dike against erosion. The blocks are per... ver más

 
Rob Holman, Hans Rod Moritz and James McMillan    
Breaking waves constitute one of the main environmental stressors on coastal structures as well as a leading hazard to navigation in nearshore regions. In this paper, we use camera-based methods to measure wave breaking over two jetty systems in the Paci... ver más

 
Maria Graça Neves, Eric Didier, Moisés Brito and María Clavero    
This paper presents a study of run-up/overtopping over a smooth impermeable dike with promenade using 2D and 3D mesh-based and mesh-free numerical models and results from 2D physical modelling for strong energetic incident waves. These waves induce plung... ver más

 
Chendi Cao and Mitchell Neilsen    
Dam embankment breaches caused by overtopping or internal erosion can impact both life and property downstream. It is important to accurately predict the amount of erosion, peak discharge, and the resulting downstream flow. This paper presents a new mode... ver más
Revista: Computation