Resumen
The problems of gully and soil erosion caused by large-scale urban construction and agricultural development in China have become more and more serious in recent years. In an effort to solve this problem, a series of gully stabilization and highland protection projects have been carried out on the Loess Plateau, and this has resulted in a large number of high-loess-filled-slopes (HLFSs). Although these filled slopes uses several different mitigation measures, the HLFSs have been eroded and destroyed under the action of water. In order to study the influence of different mitigation measures on the stability of HLFSs and their failure process, this paper uses a flume test of the effects of various mitigation measures on this failure process. The results show that: (1) the failure processes of slopes with different mitigation measures are obviously different. Slope deformation u with a declining gradient mitigation mainly occurs on the surface of the slope body, and although slope erosion is quite serious, the slope does not fail as a whole. Slopes with a stepwise drainage channel mitigation show little erosion, but material can easily slide along the horizontal drainage channels. (2) The slope deformation process is correlated with changes in pore-water pressure. When local instability occurs, there is always a pre-process of continuously rising pore-water pressure. When a failure occurs, the pore-water pressure of the soil at each position of the slope body suddenly fluctuates under instantaneous excitation. (3) The response of soil pore pressure and the development characteristics of tension cracks affect the deformation of the slopes, which is also the cause of the differences slope instability caused by different mitigation measures. These research results provide reference for the protection of HLFS engineering projects from heavy rains.