Redirigiendo al acceso original de articulo en 24 segundos...
Inicio  /  Buildings  /  Vol: 12 Par: 9 (2022)  /  Artículo
ARTÍCULO
TITULO

Production of the Traditional Organic Mortars of Padmanabhapuram Palace?A Characterization Study on the Simulated Mortars for Their Compatibility

Mani Shivakumar    
Aruna Singh    
Thirumalini Selvaraj and Shanmugapriya Thangaraj    

Resumen

The scientific investigation performed on the different mortar typologies of the Padmanabhapuram Palace mortars in a previous study led to the formulation of a similar traditional mortar. The outcome of the study was an increase in the carbonation action and mechanical strength of the mortar compared to conventional lime mortar, primarily due to the fermented organics such as aloe vera, cactus, kadukkai, hibiscus, jaggery, and neelamari. The transformation of portlandite crystals to calcite, along with the early developed C-S-H and C-A-S-H hydrated products reported by the XRD analysis. The bio-organic spectral peaks for compounds such as carbohydrates, polysaccharides, and fatty acids were observed in the FT-IR investigation, which corroborates the XRD mineralogical results. The calcite decomposition is detected in the TGA analysis in the temperature range of 700?750 °C, with a maximum weight loss of approximately 35?37% for the aloe vera lime mortar. The addition of fermented organic extracts to the extent of 5% was found to increase the internal and external carbon absorption of the aloe vera and cactus mortars compared to conventional lime mortars. The mechanical strength of the organic lime mortar reported as 2.5 MPa, and 1.5 MPa for the reference mortar. The carbonation and hydraulic reactions due to the presence of polysaccharides, fatty acids, carbohydrates, and proteins in the formulation enhanced the compressive strength of the compatible mortar. The prepared compatible mortar will support the revival of the 400-year-old practice of the application of Palace mortars.

 Artículos similares

       
 
Bettina Kraft, Rebecca Achenbach, Horst-Michael Ludwig and Michael Raupach    
The cement industry gains increasing public attention because of the high CO2 emissions for which it is accountable. One approach to improve the carbon footprint of cement production is the development of alternative binders, which can be produced with l... ver más

 
Tiago Trigo, Inês Flores-Colen, Luís Silva, Nuno Vieira, Ana Raimundo and Giovanni Borsoi    
The production of Portland cement (OP) is commonly associated to significant level of energy consumption and gas emissions. The use of calcium sulfoaluminate cement (CSA) can be a sustainable alternative binder, since its production releases about half o... ver más
Revista: Infrastructures

 
Sergio Copetti Callai, Piergiorgio Tataranni and Cesare Sangiorgi    
The use of waste materials in road construction is becoming widely spread due to economic and environmental needs. Construction and demolition waste materials and mining residues have been studied for a long time. However, the use of fine materials, main... ver más
Revista: Infrastructures

 
The dynamic development of the automotive industry and improvements in quality of life have caused a significant increase in the production of car tires. Unfortunately, when the useful life of these products comes to an end, the problem of their disposal... ver más
Revista: Buildings

 
Lime slaker grits and biomass fly ash are solid wastes produced by the Kraft paper-pulp industry that are commonly disposed of in landfill. However, recent studies and European regulations discourage such disposal practices. This work investigates an alt... ver más
Revista: Sustainability