Redirigiendo al acceso original de articulo en 22 segundos...
Inicio  /  Applied Sciences  /  Vol: 12 Par: 15 (2022)  /  Artículo
ARTÍCULO
TITULO

Tensile Test Analysis of Tire Tread Rubber?s Tendency to Resist Cracks

Ingyu Noh    
Sangyeop Hong and Jaehoon Kim    

Resumen

Among the various components of a tire, this study explores the tread portion, which has the longest contact with the ground during the summer, all-weather, and in the winter. The mechanical properties of three types of tread crack specimens were measured, and a stress?strain diagram for each specimen at low and high speeds was derived. Through the digital image correlation method, the crack tip opening displacement and angle were considered as fracture parameters and derived through equations. Subsequently, the different fracture progression regions were compared and analyzed to confirm the characteristics of the elastic displacement field. It was found that under both low- and high-speed conditions, the maximum elastic strains for the tread specimens were attained in the following order: summer, all-weather, and winter.

 Artículos similares

       
 
Wen-Shen Ran, Li Niu, Yang Wang, Nan Lin, Guo-Wei Feng and Hui-Qing Lan    
In recent years, polyethylene (PE) pipes have been widely utilized for urban natural gas transmission. However, as the use of high-density polyethylene (HDPE) pipes increases, their service life and long-term performance assessment have become one of the... ver más
Revista: Applied Sciences

 
Sabina Cherneva, Vladimir Petrunov, Vladimir Petkov, Vladimir Bogdanov and Silviya Simeonova    
The mechanical properties, structure, and morphology of milled and 3D-printed Ti-6Al-4V alloys produced by selective laser melting were investigated in this study. The mechanical properties were investigated by means of nanoindentation, a tensile test, a... ver más
Revista: Applied Sciences

 
Rafael Ramirez, Rosana Muñoz and Paulo B. Lourenço    
This paper presents an experimental and analytical methodology for the mechanical characterization of metal anchors in ancient brick masonry walls. The presented results contribute to the identification of the most efficient anchoring systems for strengt... ver más
Revista: Applied Sciences

 
Ali Sadik and Filiz Karabudak    
Today, especially in many fields that require structural durability, such as the aerospace and automotive industries, there has been a need to use different bonding techniques separately or together in order to use materials together with different mecha... ver más
Revista: Applied Sciences

 
Maohua Zhang, Zenong Tian and Jiyin Cui    
In order to study the influence of nanomaterials on the carbonation resistance of marine concrete under bending loads, an appropriate amount of nano-SiO2 was added to plain concrete, and a self-developed carbonation box and bending loading device were us... ver más