Redirigiendo al acceso original de articulo en 21 segundos...
Inicio  /  Applied Sciences  /  Vol: 10 Par: 16 (2020)  /  Artículo
ARTÍCULO
TITULO

Glass-Ceramic Foams from Alkali-Activated Vitrified Bottom Ash and Waste Glasses

Miroslava Hujova    
Patricia Rabelo Monich    
Jaroslav Sedlacek    
Miroslav Hnatko    
Jozef Kraxner    
Dusan Galusek and Enrico Bernardo    

Resumen

Both vitrified bottom ashes (VBAs) and waste glasses are forms of inorganic waste material that are widely landfilled, despite having some economic potential. Building on previous studies, we prepared glass-ceramic foams by the combination of VBA with either soda-lime glass (SLG) or borosilicate glass (BSG). Suspensions of fine powders in weakly alkaline solution underwent gelation, followed by frothing at nearly room temperature. Hardened ?green? foams were sintered, with concurrent crystallization, at 850?1000 °C. All foams were highly porous (>70%), with mostly open porosity. The glass addition was fundamental in both gelation (promoting the formation of carbonate and silicate hydrated phases) and firing steps. While SLG addition enhanced the viscous flow sintering, without a significant impact on the crystallization of gehlenite, the main crystalline phase from the devitrification of VBA, BSG addition caused a reactive sintering, with remarkable changes in the phase assemblage. The glass addition generally also allowed lower sintering temperatures and yielded products with excellent crushing strength. However, only specific conditions resulted in the complete immobilization of pollutants (e.g., Cr3+ ions).

 Artículos similares

       
 
Tania L. Alcázar-Medina, Isaías Chairez-Hernández, Ana A. Lemus-Santana, Cynthia M. Núñez-Núñez and José B. Proal-Nájera    
Over the years, there has been an increase in the consumption of drugs, particularly antibiotics. Amoxicillin (AMX) is considered one of the most widely used antibiotics, causing resistance in microorganisms in the ecosystem where it is found. Additional... ver más
Revista: Applied Sciences

 
Yihua Nie, Qing Liu, Zhiheng Xiang, Shixiong Zhong and Xinyao Huang    
Efficient disposal of composite materials recycled from wind turbine blades (WTB) at end-of-life needs to be solved urgently. To investigate the modification effects and mechanism on SBS-modified asphalt of the recycled glass fiber (GF) from WTB, GF-WTB/... ver más
Revista: Applied Sciences

 
Xu Dong, Mingdong Wang, Minyuan Song and Ning Hou    
The backfilling of lime soil in ultra-deep and ultra-narrow foundation trenches is a difficult construction link, and ordinary-cemented soil has drawbacks, including poor strength, impermeability, and frost resistance. To solve these problems, fly ash (F... ver más
Revista: Applied Sciences

 
Yuexi Zhuang, Bin Zou, Shouling Ding and Peng Wang    
Resin/fiber composites were prepared by the FDM printing technology. The effects of arrangements, types (carbon, glass, and Kevlar), and volume fraction of fibers on the shear and tensile properties of resin 3D-printed composites are investigated in this... ver más
Revista: Coatings

 
Yiliang Sun, Jingwen Li and Hongfu Li    
Thermoplastic resin matrix has a high melt viscosity, which is difficult to impregnate with fibers. The addition of flame retardant will further increase the viscosity of the melt and increase the difficulty of impregnation. It is possible to reduce the ... ver más
Revista: Coatings