Redirigiendo al acceso original de articulo en 21 segundos...
Inicio  /  Applied Sciences  /  Vol: 10 Par: 23 (2020)  /  Artículo
ARTÍCULO
TITULO

Corrosion Behavior of Pre-Rusted Rebars in Cement Mortar Exposed to Harsh Environments

Gankhuyag Burtuujin    
Dasom Son    
Indong Jang    
Chongku Yi and Hyerin Lee    

Resumen

Rebar embedded inside reinforced concrete structures becomes corroded due to various factors. However, few studies have focused on the corrosion of pre-rusted rebar embedded in cement composites, and the findings reported thus far are inconsistent. Therefore, in this study, an experimental program was undertaken to examine the effect of pre-rusting on the further corrosion of reinforcements in cement composites. Pre-rust was induced using two different solutions (CaCl2 and HCl). The corrosion rate in the cement composite was analyzed using the half-cell potential and polarization resistance methods. In addition, scanning electron microscopy with energy-dispersive X-ray analysis and X-ray diffraction analysis were used to examine the morphology of the rust. The results show that the corrosion rate of the rebar embedded in the cement composite can be increased by more than 3.8 times depending on the pre-rust conditions (RE: 0.0009 mm/year, HCl: 0.0035 mm/year). In addition, we found that the corrosion products in the pre-rusted layer were comparable to those of the rebar corroded in the marine atmosphere.

 Artículos similares

       
 
Fan Cao, Peng Cao, Yangyang Li, Yi Wang, Lei Shi and Di Wu    
The passivation of zinc alloy coating was achieved through the utilization of both silicate and trivalent chromium passivation systems, employing a specific process formula consisting of Co(NO3)2 at a concentration of 2.5 g/L, C76H52O46 at 3 mL/L, Na2SiO... ver más
Revista: Coatings

 
Yafeng Zhang, Juncheng Die, Fei Li, Hai Li, Jinchun Tu, Kexi Zhang and Xiaolong Yu    
The search for lightweight and low-cost anticorrosion coatings is particularly important in coastal environments with high salt and humidity. Graphene-based anticorrosion coatings are currently unable to provide long-lasting corrosion protection for meta... ver más
Revista: Coatings

 
Jaehui Bang and Eunkyung Lee    
In this study, the surface properties of marine structures were improved by applying a twin wire arc spray process to high-strength low alloys. The effect of Al and Mo contents in Ni-Al coatings on their mechanical and corrosion behaviors was analyzed us... ver más
Revista: Coatings

 
Byung-Ki Son, Ji-Won Choi, Su-Byung Jeon and In-Joon Son    
Zinc (Zn) coatings, which are widely used to protect metals from corrosion, can be further improved by alloying with nickel (Ni). Increasing the Ni content enhances the corrosion-resistant properties of the Zn coating. This study investigated the effect ... ver más
Revista: Applied Sciences

 
Abdulnaser M. Alshoaibi and Abdullateef H. Bashiri    
The objective of this study is to examine the behavior of fatigue crack growth (FCG) in the mixed mode (I/II) of the AISI 316 austenitic stainless steel alloy, considering mode mixity angles of 30°, 45°, and 60°. This particular alloy is widely used in t... ver más
Revista: Applied Sciences