Redirigiendo al acceso original de articulo en 22 segundos...
ARTÍCULO
TITULO

Shimmy vibration control using robust model predictive control

A. Otmane Cherif    

Resumen

Shimmy vibration is a very important common phenomenon in the landing gear system during either the take-off or landing of an aircraft. Shimmy vibration is the lateral and torsional vibrations in the wheel of the aircraft that is self-excited and causes instability in high speed performances which can damage the landing gear of the aircraft, its fuselage and even may result in hurting the passengers. In this paper, the aircraft landing gear shimmy dynamics model is studied with the following variable parameters; caster length, taxiing velocity and spring stiffness. The considered linearized landing gear system is a typical Linear Parameter Varying system, whose state-space matrices are functions of those varying parameters. The control objective is to steer the yaw angle to zero in order to suppress the shimmy when the landing gear system is subjected to uncertainties, which are varying taxiing velocity, and wheel caster length during landing; also, to rsional spring stiffness is considered as the probabilistic uncertain parameter. Therefore, both time-varying and probabilistic uncertain parameters are considered. Compared with two current robust model predictive controls, the proposed shimmy controller can effectively suppress the shimmy with more efficient computation. To verify the efficiency of the proposed algorithm, the simulation results are simulated by MATLAB software and its performance and efficiency are verified and discussed using comparative analysis.

 Artículos similares

       
 
Yiyao Jiang, Guang Feng, Panglun Liu, Li Yuan, Jianbin Ding and Bingyan Jiang    
Through the establishment of a three-dimensional joint clearance model, the effects of joint clearances at different positions on shimmy stability are evaluated. In this paper, considering the radial, axial and coupling characteristics of joint clearance... ver más
Revista: Aerospace

 
Yuan-Jen Chang, He-Kai Hsu, Tzu-Hsuan Hsu, Tsung-Ti Chen and Po-Wen Hwang    
With the development of next-generation airplanes, the complexity of equipment has increased rapidly, and traditional maintenance solutions have become cost-intensive and time-consuming. Therefore, the main objective of this study is to adopt predictive ... ver más
Revista: Aerospace

 
Wenbin Liu, Youshan Wang and Yuchen Ji    
Landing impact load design is essential, but the process has rarely been fully described, and some designers have even neglected the differences between wheel-axle and ground-contact loads, as well as loads in the longitudinal direction, especially in ex... ver más
Revista: Aerospace

 
Quang-Ngoc Le, Hyeong-Mo Park, Yeongjin Kim, Huy-Hoang Pham, Jai-Hyuk Hwang and Quoc-Viet Luong    
Aircraft landing gear equipped with a magnetorheological (MR) damper is a semi-active system that contains nonlinear behavior, disturbances, uncertainties, and delay times that can have a huge impact on the landing?s performance. To solve this problem, t... ver más
Revista: Aerospace

 
Guang Feng, Bingyan Jiang and Yiyao Jiang    
The existence of joint clearances in the nose landing gear (NLG) is inevitable and significantly affects shimmy. It was found that the interaction of each joint clearance is closely related to the analysis of shimmy stability. In this study, the shimmy m... ver más
Revista: Aerospace