Redirigiendo al acceso original de articulo en 23 segundos...
ARTÍCULO
TITULO

Numerical Analysis of an Industrial-Scale Steam Methane Reformer

Chun-Lang Yeh    

Resumen

A steam reformer of a hydrogen plant is a device that supplies heat to convert the natural gas or liquid petroleum gas into hydrogen via catalysis. It has been often used in the petrochemical industry to produce hydrogen. Control of the catalyst tube temperature is a fundamental demand of the reformer design because the tube temperature must be maintained within a range that the tube has minor damage and the catalysts have a high activity to convert the natural gas or liquid petroleum gas into hydrogen. In this research, the effect of the burner on/off manners on the catalyst tube temperature and the hydrogen yield of an industrial-scale side-fired steam methane reformer is investigated. The aim is to seek a feasible burner on/off manner that has acceptable catalyst tube temperature and hydrogen yield, so as to improve the performance and service life of a steam methane reformer. It is found that when one group of burners is turned off, the outer surface temperatures of the tubes are decreased by about 94°C in average, the inner surface temperatures are decreased by about 54°C in average, and the hydrogen yields are decreased by about 4%. When two groups of burners are turned off, the outer surface temperatures of the tubes are decreased by about 175°C in average, the inner surface temperatures are decreased by about 106°C in average, and the hydrogen yields are decreased by about 7.9%. When three groups of burners are turned off, the outer surface temperatures of the tubes are decreased by about 251°C in average, the inner surface temperatures are decreased by about 151°C in average, and the hydrogen yields are decreased by about 11.4%. The catalyst tube temperatures and the hydrogen yields reduce to a greater extent in regions where burners are turned off. When the central groups of burners are turned off, the tube temperatures and the hydrogen yields have greater reductions. On the other hand, when the rear groups of burners are turned off, the tube temperatures and the hydrogen yields have lower reductions.

 Artículos similares

       
 
Kichan Sim and Kangsu Lee    
A digital twin is a virtual model of a real-world structure (such as a device or equipment) which supports various problems or operations that occur throughout the life cycle of the structure through linkage with the actual structure. Digital twins have ... ver más

 
Marko Motaln and Tone Lerher    
Numerical simulations play a vital role in the modern engineering industry, especially when faced with interconnected challenges such as particle interactions and the structural integrity of conveyor systems. This article focuses on the handling of mater... ver más
Revista: Applied Sciences

 
Lin Liu, Xiumei Zhang and Xiuming Wang    
The inversion of gas hydrate saturation is a critical procedure in the evaluation of hydrate reservoirs. In this paper, a theoretical model for a borehole acoustic wavefield excited by multipole sources is established for the first time. On this basis, t... ver más

 
Siliang Du, Yi Zha and Qijun Zhao    
The concept of the Fan Wing, a novel aircraft vector-force-integrated device that combines a power unit with a fixed wing to generate distributed lift and thrust by creating a low-pressure vortex on the wing?s surface, was studied. To investigate the uni... ver más
Revista: Aerospace

 
Abdul Basit, Safeer Abbas, Muhammad Mubashir Ajmal, Ubaid Ahmad Mughal, Syed Minhaj Saleem Kazmi and Muhammad Junaid Munir    
This study undertakes a comprehensive experimental and numerical analysis of the structural integrity of buried RC sewerage pipes, focusing on the performance of two distinct jointing materials: cement mortar and non-shrinkage grout. Through joint shear ... ver más
Revista: Infrastructures