Redirigiendo al acceso original de articulo en 15 segundos...
ARTÍCULO
TITULO

Study on Reactivity of Circulating Fluidized Bed Combustion Fly Ashes in the Presence of Water

Salain I.M.A.K.    

Resumen

A study on reactivity of four different Circulating Fluidized Bed Combustion (CFBC) fly ashes has been realized in the presence of water. Paste of each ash was prepared and analyzed for its setting time, expansion and strength. The products of hydration, and their evolutions over a period of time were identified by X-ray diffraction and differential thermal analysis. The results of this study show that the reactivity of the CFBC fly ashes is strongly related to their chemical composition, essentially to their quantity of silica, alumina, lime and sulfate, which promote principally the formation of ettringite, gypsum and C-S-H. It is further noted that the intensity and the proportion of these phases determine the hydration behavior of the CFBC fly ashes.

 Artículos similares

       
 
Kristen Courtney Carpenter, Loic Bethel Dje, Mercy Achang and Mileva Radonjic    
The Marcellus shale is an unconventional reservoir of significant economic potential with Total Organic Carbon (TOC) ranging from 1 to 20%. Hydraulic fracturing is used to extract the shale?s resources, which requires large amounts of water and can resul... ver más
Revista: Water

 
Xuesong Cui, Minhui Xiao, Ran Tao, Rui Hu, Hans Ruppert, Willis Gwenzi and Chicgoua Noubactep    
Granular metallic iron (gFe0) materials have been widely used for eliminating a wide range of pollutants from aqueous solutions over the past three decades. However, the intrinsic reactivity of gFe0 is rarely evaluated and existing methods for such evalu... ver más
Revista: Water

 
Aleksey V. Zhuzhgov, Lyubov A. Isupova, Evgeny A. Suprun and Aleksandr S. Gorkusha    
This study revealed an increased reactivity of centrifugally thermoactivated products of gibbsite toward aqueous solutions of nickel nitrate at room temperature as well as under hydrothermal conditions. X-ray, thermal, microscopy, adsorption and chemical... ver más
Revista: ChemEngineering

 
Vitor A. Nunes, Prannoy Suraneni, Augusto C. S. Bezerra, Carlos Thomas and Paulo H. R. Borges    
Steel slag (SS) is a secondary material from steelmaking production with little commercial value. Its volumetric expansion and low reactivity limit the use of SS in Portland cement (PC)-based materials. This study investigated the potential use of basic ... ver más
Revista: Applied Sciences

 
Siti Sarah,Adisalamun Adisalamun,Darmadi Darmadi,Suraiya Kamaruzzaman,Abrar Muslim,Saiful Saiful     Pág. 27 - 37
This paper proposed adsorbent development by synthesizing polyurethane foam (PUF) using a simple method, mixing polyol with isocyanate and adding fillers of bentonite and magnetite to the PUF matrix. The study's main objective was to produce a PUF-based ... ver más