Redirigiendo al acceso original de articulo en 15 segundos...
ARTÍCULO
TITULO

Fast Response Three Phase Induction Motor Using Indirect Field Oriented Control (IFOC) Based On Fuzzy-Backstepping

Rizana Fauzi    
Dedid Cahya Happyanto    
Indra Adji Sulistijono    

Resumen

Induction Motor in Electrical drive system at a accelleration speed for example in electric cars have a hard speed setting is set on a wide range, causing an inconvenience for motorists and a fast response is required any change of speed. It is necessary for good system performance in control motor speed and torque at low speed or fast speed response, which is operated by Indirect Field Oriented Control (IFOC). Speed control on IFOC methods should be better to improving the performance of rapid response in the induction motor. In this paper presented a method of incorporation of Fuzzy Logic Controller and Backstepping (Fuzzy-Backstepping) to improve the dynamically response speed and torque in Induction Motor on electric car, so we get smoothness at any speed change and braking as well as maximum torque of induction motor. Test results showed that Fuzzy-Backstepping can increase the response to changes speed in electric car. System testing is done with variations of the reference point setting speed control system, the simulation results of the research showed that the IFOC method is not perfect in terms of induction motor speed regulation if itâ??s not use speed control. Fuzzy-Backstepping control is needed which can improve the response of output, so that the induction motor has a good performance, small oscillations when start working up to speed reference.Keywords: Fuzzy-Backstepping, IFOC, induction motor

 Artículos similares

       
 
Zhaohui Yao, Yiwen Qi, Wen Bao and Tianhong Zhang    
A high-precision variable-thrust control method based on real-time measurement of pintle displacement and closed-loop feedback control is proposed to solve the technical problems of deep throttling variable-thrust regulation and control of pintle liquid ... ver más
Revista: Aerospace

 
Mara Bruzzi, Naomi Falsini, Nicola Calisi, Paolo Scardi and Anna Vinattieri    
CsPbCl3 perovskite is attracting increasing interest in ultraviolet (UV) detection due to its optical band gap and superior intrinsic optoelectronic properties. In this study, a novel one-step magnetron sputtering technique was applied for fabricating Cs... ver más
Revista: Coatings

 
Yuantian Qin, Yucheng Zhang, Vadim Silberschmidt and Luping Zhang    
The location identification of dynamic load is an important part of load-identification technology. Traditional methods are mostly aimed at the identification of dynamic load?s amplitude and phase. A new method for dynamic load location identification is... ver más
Revista: Aerospace

 
Richard Drevet, Joël Fauré and Hicham Benhayoune    
This review deals with the design of bioactive calcium phosphate coatings deposited on metallic substrates to produce bone implants. The bioceramic coating properties are used to create a strong bonding between the bone implants and the surrounding bone ... ver más
Revista: Coatings

 
Anatoly Kalyakin, Alexander Volkov and Liliya Dunyushkina    
An amperometric sensor based on CaZr0.95Sc0.05O3-d (CZS) proton-conducting oxide for the measurement of hydrogen concentration in air was designed and tested. Dense CZS ceramics were fabricated through uniaxial pressing the powder synthesized by the soli... ver más
Revista: ChemEngineering