Redirigiendo al acceso original de articulo en 24 segundos...
ARTÍCULO
TITULO

Analysis of lubricant oil contamination and degradation and wear of a biogas-fed otto cycle engine

Rovian Bertinatto    
Leandro Friedrich    
Reinaldo Aparecido Bariccatti    
Samuel Nelson Melegari de Souza    
Flavio Gurgacz    
Felix Augusto Pazuch    

Resumen

The increasing deployment of biodigesters for the treatment of waste on farms and the use of the biogas generated in the production of energy have highlighted the need for knowing the influence of this fuel on internal combustion engines. This study aimed to analyze the influence of filtrated biogas on lubricant oil contamination and degradation, as well as on engine wear and corrosion. Lubricant oil samples were collected every 75 engine operating hours (EOH) and then correlated between each other and with a sample of new oil, determining the elements present in the biogas that contribute to lubricant oil contamination and degradation, as well as lubricant oil performance in the course of EOH and engine wear. The results demonstrate that hydrogen sulfide affects the performance of the lubricant oil and engine wear. Among the metals, we observed that the copper concentration exceeded the maximum limit recommended in the literature. As for the additives, the variation in concentrations of magnesium impacted on lubricant performance. By monitoring lubricant oil quality were able to extend the engine oil change interval of this study by 50%, what resulted in a savings of 33.3% in the cost of lubricant per hour worked.

Palabras claves

 Artículos similares

       
 
Yu Wang, Junci Cao, Qingbin Tong, Guoping An, Ruifang Liu, Yihuang Zhang and Hua Yan    
The transient thermal performance of rolling bearings affects the mechanical performance and system safety of traction motors. Most of the traditional empirical formulas used in temperature analysis have been simplified and cannot be completely applied t... ver más
Revista: Applied Sciences

 
Vamsi Krishna Pasam, Padmini Rapeti, Surendra Babu Battula     Pág. 78 - 85
This paper presents the experimental investigations on the performance of eco-friendly vegetable oil based nanofluids in turning operation. In order to assess the quality of nano cutting fluids used during machining, cutting temperatures, cutting forces,... ver más

 
Oleksii Papeikin,Oleg Safronov,Larysa Bodachivska,Irina Venger     Pág. 54 - 60
The possibility of using the wastes of the oil and fat industry ? phosphatide concentrates as components of lubricating materials was demonstrated in this paper. At the first stage, amidation of phosphatide concentrate from the purification of rapeseed o... ver más

 
Gustavo Antunes Maia,Nilson Brandalise     Pág. 1419 - 1433

 
H.C. Garg, Vijay Kumar and H.B. Sharda