Redirigiendo al acceso original de articulo en 16 segundos...
Inicio  /  Energies  /  Vol: 12 Núm: 3 Par: Februar (2019)  /  Artículo
ARTÍCULO
TITULO

On-Board Cold Thermal Energy Storage System for Hydrogen Fueling Process

Young Min Kim    
Dong Gil Shin and Chang Gi Kim    

Resumen

The hydrogen storage pressure in fuel cell vehicles has been increased from 35 MPa to 70 MPa in order to accommodate longer driving range. On the downside, such pressure increase results in significant temperature rise inside the hydrogen tank during fast filling at a fueling station, which may pose safety issues. Installation of a chiller often mitigates this concern because it cools the hydrogen gas before its deposition into the tank. To address both the energy efficiency improvement and safety concerns, this paper proposed an on-board cold thermal energy storage (CTES) system, cooled by expanded hydrogen. During the driving cycle, the proposed system uses an expander, instead of a pressure regulator, to generate additional power and cold hydrogen gas. Moreover, CTES is equipped with phase change materials (PCM) to recover the cold energy of the expanded hydrogen gas, which is later used in the next filling to cool the high-pressure hydrogen gas from the fueling station.

 Artículos similares

       
 
Stefan Ritter and Hans-Peter Seifert    
Low-alloy reactor pressure vessel steels have a rather low susceptibility to stress corrosion cracking (SCC) in a boiling water reactor (BWR) environment if the high-temperature water contains no anionic impurities. Recent investigations revealed that un... ver más

 
Jennifer Reeve, Oliver Grasham, Tariq Mahmud and Valerie Dupont    
A techno-economic analysis has been used to evaluate three processes for hydrogen production from advanced steam reforming (SR) of bio-oil, as an alternative route to hydrogen with BECCS: conventional steam reforming (C-SR), C-SR with CO2 capture (C-SR-C... ver más

 
Younes Gaga, Safaa Benmessaoud, Mohammed Kara, Amine Assouguem, Abdullah Ahmed Al-Ghamdi, Fahad M. Al-Hemaid, Mohamed S. Elshikh, Riaz Ullah, Artur Banach and Jamila Bahhou    
The present research concerns the development of a new device and process intended for the purification and treatment of sulfurous elements, and more particularly, of hydrogen sulfide (H2S) from the biogas produced at the time of the anaerobic fermentati... ver más
Revista: Water

 
Sagar Tale, Ramadan Ahmed, Rida Elgaddafi and Catalin Teodoriu    
The scope of this study includes modeling and experimental investigation of sulfide stress cracking (SSC) of high-strength carbon steel. A model has been developed to predict hydrogen permeation in steel for a given pressure and temperature condition. Th... ver más

 
Thomas Quaid and M. Toufiq Reza    
Deep eutectic solvents (DES) are compounds of a hydrogen bond donor (HBD) and a hydrogen bond acceptor (HBA) that contain a depressed melting point compared to their individual constituents. DES have been studied for their use as carbon capture media and... ver más