Redirigiendo al acceso original de articulo en 19 segundos...
Inicio  /  Coatings  /  Vol: 8 Núm: 8 Par: August (2018)  /  Artículo
ARTÍCULO
TITULO

Microstructure and Oxidation Resistance of a Si Doped Platinum Modified Aluminide Coating Deposited on a Single Crystal Superalloy

Qixiang Fan    
Haojun Yu    
Tiegang Wang and Yanmei Liu    

Resumen

A Si doped Pt modified aluminide coating was prepared by electroplating and the chemical vapour deposition method. The microstructure and oxidation resistance of the coating were studied, with a single Pt modified aluminide coating as a reference. The results showed that the Si doped Pt modified aluminide coating consisted of singular β-(Ni, Pt)Al phase, and no PtAl2 phase was detected, which might be due to the fact that the addition of Si retarded the formation of PtAl2 phase in the outer layer. Si was dissolved in the β-(Ni, Pt)Al phase in the outer layer and might form silicide with refractory elements in the inter-diffusion zone. The Si doped Pt modified aluminide coating possesses a better oxidation resistance than the Pt modified aluminide coating since Si could promote the formation of α-Al2O3 and inhibit the diffusion of the refractory elements, reducing the formation of detrimental volatile phase.

Palabras claves

 Artículos similares

       
 
Agnieszka Ossowska, Andrzej Zielinski, Jean-Marc Olive, Andrzej Wojtowicz and Piotr Szweda    
The increasing demand for titanium and its alloys used for implants results in the need for innovative surface treatments that may both increase corrosion resistance and biocompatibility and demonstrate antibacterial protection at no cytotoxicity. The pu... ver más
Revista: Coatings

 
Andrzej Zielinski and Michal Bartmanski    
Coatings deposited under an electric field are applied for the surface modification of biomaterials. This review is aimed to characterize the state-of-art in this area with an emphasis on the advantages and disadvantages of used methods, process determin... ver más
Revista: Coatings

 
Bin Xie, Jiaxiang Xue, Xianghui Ren, Wei Wu and Zhuangbin Lin    
Adopting the cold metal transfer plus pulse (CMT + P) process, 316L stainless steel wire was treated with a single channel multi-layer deposition experiment under different linear energy. The microstructures of different regions on the deposited samples ... ver más
Revista: Applied Sciences

 
Yanxiong Xiang, Lingling Huang and Changwei Zou    
Cr?Si?N nanocomposite coatings were deposited by multi-arc ion plating under different bias voltages. The influences of bias voltage on composition, microstructure, surface morphology and mechanical properties of Cr?Si?N nanocomposite coatings were inves... ver más
Revista: Coatings

 
Haijuan Mei, Rui Wang, Xing Zhong, Wei Dai and Qimin Wang    
In this study, Mo-Cu-V-N composite coatings with high Cu content of ~18 at.% were deposited on 316L stainless steel and YT14 cemented carbide substrates by high power impulse magnetron sputtering in Ar?N2 gas mixtures. The influence of N2 partial pressur... ver más
Revista: Coatings