Redirigiendo al acceso original de articulo en 22 segundos...
Inicio  /  Coatings  /  Vol: 6 Núm: 4 Par: Decembe (2016)  /  Artículo
ARTÍCULO
TITULO

Influence of Surface Roughness and Agitation on the Morphology of Magnetite Films Electrodeposited on Carbon Steel Substrates

Soon-Hyeok Jeon    
Won-Ik Choi    
Geun-Dong Song    
Yeong-Ho Son and Do Haeng Hur    

Resumen

In this work, we investigated the effects of surface roughness and agitation on the morphology of magnetite films electrodeposited from alkaline Fe(III)-triethanolamine (TEA) solutions on carbon steel substrates. The surface roughness of the carbon steel substrates was maintained in the range of 1.64?0.06 µm by using mechanical grinding and polishing methods. The agitation speed was set at 0 and 900 rpm during the electrodeposition process. The particle size and surface roughness value of the magnetite films gradually decreased with decreasing substrate roughness. However, the influence of the substrate roughness on the thickness of the magnetite film was negligible. The morphology of the magnetite film fabricated at 900 rpm appeared to be highly faceted compared to that of the magnetite film produced at 0 rpm. The thickness and surface roughness of the magnetite film significantly increased with the agitation speed, which also significantly affected the electrodeposition efficiency. The effects of substrate surface roughness and agitation on the morphology of magnetite films electrodeposited on carbon steel substrates were also discussed. The obtained results provide critical information for the simulation of magnetite deposits on carbon steel pipes in the secondary systems of nuclear power plants.

 Artículos similares

       
 
Bohan Liu and Sunho Park    
When tidal turbines are deployed in water areas with significant waves, assessing the surface wave effects becomes imperative. Understanding the dynamic impact of wave?current conditions on the fluid dynamic performance of tidal turbines is crucial. This... ver más

 
Xin Zhang, Wenjing Wang, Chaopin Bai, Yueqiang Sun, Shichen Jiang, Zhihao Yang, Qiang Chen, Lichang Zhang, Liguo Zhang, Zhiliang Zhang, Ziting Wang and Shuai Zhang    
The present study can be applied to the study of the influence of a Hall thruster plume on the spacecraft surface.
Revista: Applied Sciences

 
Xiaoyang Li, Xiaohui Lin, Changyue Xu and Zhuopei Li    
The calculation of a cockpit?s transient thermal load is important for determining the capacity of the cockpit environmental control system, ensuring the safety of electronic equipment and increasing the health and comfort of cockpit occupants. According... ver más
Revista: Aerospace

 
Tânia Soares, Carlos Fernandes, Cláudia Barbosa, Mário A. P. Vaz, Tiago Reis and Maria Helena Figueiral    
Polyetheretherketone is a high-performance thermoplastic polymer that can be used in 3D printing by fused deposition modeling, and is a promising material for dental applications. Some printing parameters are sensitive and can influence the properties of... ver más
Revista: Applied Sciences

 
Grzegorz Struzikiewicz    
An effective chip formation process is significant for an efficient metal-cutting process. Long continuous chips can lead to scratches on the machined surface, increasing the risk to operator safety and stability of the machining process. The use of chip... ver más
Revista: Applied Sciences