Redirigiendo al acceso original de articulo en 18 segundos...
Inicio  /  Aerospace  /  Vol: 6 Par: 2 (2019)  /  Artículo
ARTÍCULO
TITULO

High-Bandwidth Morphing Actuator for Aeroelastic Model Control

Sebastiano Fichera    
Irma Isnardi and John E. Mottershead    

Resumen

The design and testing of a high-bandwidth continuous actuator for aeronautical applications is presented hereinafter. The actuator has a dual goal of controlling both the aeroelastic behaviour and the flight mechanics of the model in which it is installed. In order to achieve these aims, the actuation bandwidth of the active aerofoil, as well as its static camber variation, have to be sufficiently high. The camber morph is achieved by using tailored piezoelectric patches in a sandwich configuration with a linear trailing edge slider to allow the necessary compliance. The morphing actuator is designed for a NACA 0018 aerofoil with a chord of 300 mm and a span of 40 mm. Static and dynamic experimental tests are carried out on a prototype, and a camber variation control technique is implemented. It is proved that the actuator bandwidth is up to 25 Hz and the equivalent maximum deflection is ±15" role="presentation" style="position: relative;">±15±15 ± 15 degrees. This solution is shown to be a viable light-weight alternative to the conventional brushless/servo-motor approach currently used in aeroelastic models.

 Artículos similares